Maintenance; Technical Assistance - S&P EMI-TECH Manual

16
17
Locking of the heater
This option is very useful for public places / hotels, etc., to avoid anybody tampering with the heater's controls. By
activating this function, the heater will work in the set mode and will restrict people from changing the controls.
Press the "+" key and the "-" key for 2 seconds (at the same time) to activate/deactivate the lock. When the heater
is locked, the Padlock icon will appear on the screen.
ERR
Error message
If this message appears on the screen, please consult your installer or the S&P After Sales Service.

6. MAINTENANCE

Before carrying out any maintenance operation, make sure the device is unplugged from the mains. These radiators do not
require any special maintenance. We advise you to regularly dust the radiator with a dry cloth. Always clean it when it is
cold and don't use solvents or abrasives. If you are not going to use the radiator for a long time we advise you to take it out
of the mains and gather up the cable to make it safe.
7. OUT OF SERVICE AND RECYCLING
EEC legislation and our consideration of future generations mean that we should always recycle materials whe-
re possible; please do not forget to deposit all packaging in the appropriate recycling bins. If your device is also
labeled with this symbol, please take it to the nearest Waste Management Plant at the end of its servicable life.
8. RELEVANT INFORMATION FOR THE DISMANTLING, RECYCLING OR DISPOSAL OF THE PRODUCT
AT THE END OF ITS OPERATING LIFE
If the appliance is scrapped, the necessary provisions for the disposal or recycling of the materials and components, inclu-
ding the internal oil, must be followed.
List of the main materials of the heater:
• Oil
• Aluminium (radiator components).
• Internal and external sides in ABS PC plastic.
• Electronic Panels with tin.
• Electrical cables.
• Electrical resistor.

9. TECHNICAL ASSISTANCE

The extensive S&P Offi cial Services Network guarantees adequate technical support. If you observe any anomaly in the
operation of the appliance, please contact any of the aforementioned services, where we will provide the appropriate su-
pport. Any tampering not strictly necessary for the installation of the appliance carried out by anyone outside S&P's Offi cial
Services will force us to cancel the warranty. If you have any queries about S&P products contact the After Sales Services
Network if it is in Spain, or your usual distributor in your country of origin. You can check our WEBPAGE to fi nd your nearest
one: www.solerpalau.com
Indicates the version of the heater's control software.
END. End of the settings menu.
23