Maintenance - S&P SAHARA 1503 Manual

3. Select the desired power setting using the two switches with light indicator (Fig. 3 A-B).
SAHARA series models have 3 operating options, with different heating outputs:
EN
II + I
II
I
4. When the room reaches the required temperature, rotate the thermostat control anti clockwise
until it clicks and turns off the device.
When the thermostat control is in this position, the appliance will switch on and off automatically
to keep the pre-selected comfort temperature constant.
FROST DEVICE
The SAHARA Serie incorporates an anti-frost device that switches the unit on when the room tem-
perature falls to approx. 5ºC.
To activate this device, connect the device to the ductwork, activate the two switches in the (II+I)
position, and the thermostat knob to position
benefi cial in areas where low temperatures are reached, and can, on occasions, result in frozen
water pipes, etc...

MAINTENANCE

Before carrying out any maintenance work, make sure that the device has been disconnected from
the mains.
These radiators do not require any special maintenance. A dry cloth should be used to remove the
dust from the radiator. The appliance should only be cleaned when cold, solvents and abrasive
products should be avoided.
If the radiator is not going to be used for a long period of time, disconnect it from the mains, store
the cable away in the side compartment and keep the device in its packaging in a dry place.
RELEVANT INFORMATION FOR THE DISMANTLING, RECYCLING OR ELIMINATION
OF THE PRODUCT AT THE END OF THE USEFUL LIFE
In the case of scrapping the appliance, the provisions corresponding to the disposal or recycling of
the materials and components must be respected, including internal oil.
List of the main radiator materials:
• Oil.
• Elements, lateral covers, steel wheels supports.
• Cable box, control panel, wheels and ABS plastic controls.
• Electric cables.
10
Heating outputs
HIGHT
MEDIUM
LOW
to anti-frost (Fig. 3 C). This device is especially