Programmable Settings - S&P EMI-TECH Manual

Manual The heater works completely manually.
Irrespective of the day of the week and the time, the only component that will control the heater's operation
will be the thermostat.
For this operating mode, there is a colour information bar (green / orange / red) at the bottom of the screen,
which, depending on the temperature selected, will quickly indicate the energy consumption chosen, (low /
medium / high).
OFF Standby mode.
The heater will be in OFF mode, not working, but conserving the previously set settings and times.

5.4. PROGRAMMABLE SETTINGS

Prolonged absences
This function is useful for when the user is not at home. The Heater will stay in DE-ICE mode during the time of
absence:
• To programme this function, press the CONFIG/PROG key with short presses, until the suitcase icon appears on
the screen.
• Confi rms that we want to confi gure a holiday absence (NO/YES) with the MODE/OK key. Press MODE/OK to enter
the start and end dates of your holiday absence (DATE).
With the +/- keys select the day/month you will be absent.
Press MODE/OK to confi rm.
With the +/- keys select the day/month you will return from holiday.
Press MODE/OK to confi rm.
You have fi nished setting your holiday absence. The screen will display the days remaining before exe-
cuting the holiday absence programme, alternating with the room temperature. The suitcase icon will
fl ash along with the word "START".
Once the set absence time has passed, the heater will continue in the operating mode we have set before our ab-
sence.
Timer
This function is useful for when the user wants to set the room temperature for a specifi c time period:
• Press the CONFIG/PROG key with short presses, until the hourglass icon appears on the screen. Then press
MODE/OK to enter the confi guration screen.
• With the +/- keys select the desired time period. The time range that can be adjusted is: 15-30-45 minutes, 1-23
hours or 1-44 days. Press MODE/OK to confi rm.
• With the +/- keys select the room temperature desired during the time period previously selected. Press MODE/OK
to confi rm. Once the set time has passed, the heater will continue in the operating mode previously set.
DE-ICE / ECO / COMFORT operating modes
To adjust the temperatures for each of the heater's three operating modes:
• Press the CONFIG/PROG key with short presses, until the thermometer icon appears. Then press MODE/OK to
enter the confi guration screen.
• With the +/- keys change the factory-set temperatures of each mode. We can save these by pressing MODE/OK
twice.
18