Omron E3X-DRT21-S User Manual page 45

15 14 13
m + 2CH
m + 3CH
m + 4CH
:
:
m + nCH
m + n + 1CH
• If the number of units to be monitored for the detection level is bigger than the number of sensors to be
communicated with, the detection level of unconnected sensors are [0000].
• When the Mobile Console is connected, data is [7FFF], because the detection level cannot be
retrieved.
• When communications with a sensor fail, the detection level of the sensor are [7FFF].
• The ON/OFF output of the sensor and update timing of the detection level are not synchronized. Note
that, even if you confirm ON/OFF state to retrieve the detection level, they are not the detection level
upon ON/OFF. Set the display settings to peak on detected and bottom on undetected to retrieve the
detection level upon ON/OFF.
DeviceNet Remote I/O Communications
12 11 10 09 08 07
Unit No. 1 Detection level
Unit No. 2 Detection level
Unit No. 3 Detection level
:
:
Unit No. n - 1 Detection level
Unit No. n Detection level
Number of units to be monitored for digital values: n
06 05 04 03 02 01
Section 3
00
E3X-DRT21-S
43
User's Manual