Table of Contents
Advertisement
Accessories (Order Separately)
Mounting Bracket
Appearance
Model
E39-L143
End Plate
Appearance
Model
PFP-M
Specifications
Sensor Heads
Model
E2C-EDR6-F
3 dia. × 18 mm
Item
Sensing distance
0.6 mm
Sensing object
Magnetic metal (The sensing distance will decrease when sensing non-magnetic metal. Refer to Engineering Data on 87.)
5 × 5 × 3 mm
Standard sensing object
Material: iron (S50C)
Repeat accuracy
1 µm
(See note 1.)
Hysteresis distance
Variable
Temper-
Sensor Head
0.3%/° C
ature
Preamplifier and
0.08%/° C
charac-
Amplifier
teristic
(See
note 1.)
Ambient
Operating
–10° C to 60° C (with no icing or condensation)
tempera-
ture (See
Storage
–10° C to 60° C
note 2.)
(with no icing or
condensation)
Ambient humidity
Operating/storage: 35% to 85% (with no condensation)
Insulation resistance
50 MΩ min. (at 500 VDC)
Dielectric strength
1,000 VAC at 50/60 Hz for 1 min between current carry parts and case
Vibration resistance
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
Destruction: 500 m/s
Degree of protection
IEC60529 IP67
Connection method
Connector (standard cable length: 2.5 m (2 m between Head and Preamplifier)
"-F" model cable length: 3.5 m (0.5 m between Head and Preamplifier)
Weight (packed state)
Approx. 120 g (Models with protective spiral tube ("-S" models) are approx. 90 g heavier.)
Material
Sensor
Case
Brass
Head
Sensing
Heat-resistant ABS
surface
Clamp-
---
ing nut
Toothed
---
washer
Preamplifier
PES
Accessories
Preamplifer Mounting Brackets, Instruction Manual
Note 1.
The repeat accuracy and temperature characteristic are for a standard sensing object positioned midway through the rated sensing distance.
2. A sudden temperature rise even within the rated temperature range may degrade characteristics.
3. For the Sensor Head only without the preamplifier ( 10 to 60° C). With no icing or condensation.
4. Do not operate in areas exposed to water vapor because the enclosure is not waterproof.
E2C-EDA
Quantity
1
Quantity
1
E2C-ED01(-@)
E2C-ED02(-@)
5.4 dia. × 18 mm
8 dia. × 22 mm
1 mm
2 mm
10 × 10 × 3 mm
2 µm
0.08%/° C
–20° C to 70° C (with no icing or condensation)
for 3 times each in X, Y, and Z directions
2
Stainless steel Brass
E2C-EM02-@)
E2C-EM07(-@)
M10 × 22 mm
M18 × 46.3 mm 30 × 14 × 4.8 mm
7 mm
22 × 22 × 3
mm
5 µm
Nickel-plated brass
Zinc-plated iron
E2C-EV05(-@)
E2C-EM02H
M12 × 22 mm
5 mm
2 mm
15 × 15 × 3
20 × 20 × 3
mm
mm
2 µm
0.04%/° C
0.2%/° C
–10° C to 200° C
(See note 3.)
IEC60529
IP60
(See note 4.)
Zinc
Brass
PEEK
Nickel-plated
---
brass
Zinc-plated
---
iron
D-85
Advertisement
Table of Contents
