Omron DEVICENET SAFETY - 03-2008 Operation Manual page 25

Overview
System Startup and Error Recovery Support
Access Control with a Password
I/O Connector Connection/Disconnection
Cage Clamp Wiring
Maintenance Functions
Logic Functions (DST1-XD0808SL-1 Only)
4
• Error information can be checked by using the error log function or the
indicators on the front of the DST1-series Safety I/O Terminals.
• The DST1-series Safety I/O Terminal's safety I/O data and internal status
information can be monitored from a Standard PLC by allocating the infor-
mation in the standard Master. In the same way, the information can be
monitored from a safety PLC by allocating the information in the Safety
Master.
The DST1-series Safety I/O Terminals configuration data is protected by a
password.
• The I/O Connector can be connected and disconnected.
• The I/O Connector is structured to prevent incorrect connection.
Cables can be wired without terminal screws.
The DST1-series Safety I/O Terminals are equipped with maintenance func-
tions, such as a contact operation counter and cumulative ON time monitor.
• The DST1-XD0808SL-1 Logic Terminal is provided with basic logic
parameters, such as AND and OR.
• This enables direct control of DST1-XD0808SL-1 local outputs from local
inputs without involving NE1A safety logic.
Section 1-1