Handling; Mounting/Removing Eeprom - Omron CPM1A Operation Manual

Handling

LED Indicator
6-3

Handling

6-3-1 Mounting/Removing EEPROM

! Caution
Mounting EEPROM
1, 2, 3...
140
CONNECT ERR (red)
(green)
OFF OFF
ON OFF
Blinking OFF
ON Blinking
OFF ON
OFF Blinking
Do not mount or remove the EEPROM with the CPM1-EMU01-V1 connected to
the PC. Doing so may damage the EEPROM.
1. Lift up the lock lever.
2. Straighten the pins on the EEPROM, line up with the socket and lower into
the socket, as shown in the following diagram. If the EEPROM is loose,
place it in the center of the socket.
EEPROM
Insert the EEPROM.
3. Gently hold down the EEPROM and pull down the lock lever.
Meaning
Not connected to PC (power supply OFF).
Connected to a recognized PC.
Uploading/downloading data.
Host link communications error, retry by user.
PC model and EEPROM data not compatible.
One of the following errors has occurred:
An unrecognized PC is connected.
An EEPROM error (EEPROM not present, EEPROM
defect, or no program to download) or checksum
error.
Pull down the lock lever.
Section 6-3
Lift up the lock lever.