Temperature Sensor Unit Components - Omron CPM1A Operation Manual

Unit Components

2-2-4 Temperature Sensor Unit Components

2. DIP switch
4. Expansion I/O connecting cable
1, 2, 3...
36
4. DIP Switch
Used to set averaging processing.
The following Temperature Sensor Units are available: CPM1A-TS001,
CPM1A-TS002, CPM1A-TS101, and CPM1A-TS102.
1. Temperature Input Terminals
Connect to a thermocouple or a platinum resistance thermometer.
2. DIP Switch
Sets the temperature unit (°C or °F), and the number of decimal places
used.
ON
1 2
Number of decimal places used
OFF: Normal (0 or 1); ON: 2
Temperature unit
OFF: °C; ON: °F
3. Rotary Switch
Sets the temperature range. Set the range in accordance with the specifica-
tions of the temperature sensor used.
CPM1A-TS001/002
Set value Thermocouple
0 K
1
2 J
3
4 to F ---
CPM1A-TS101/102
Set value Platinum resistance
thermometer
0 Pt100
1 JPt100
2 to F ---
3. Rotary switch
5. Expansion connector
1. Temperature input terminals
Range (°C)
–200 to 1,300 –300 to 2,300
0.0 to 500.0 0.0 to 900.0
–100 to 850 –100 to 1,500
0.0 to 400.0 0.0 to 750.0
Setting not possible
Range (°C)
–200.0 to 650.0 –300.0 to 1,200.0
–200.0 to 650.0 –300.0 to 1,200.0
Setting not possible
Section 2-2
Range (°F)
Range (°F)