Related Products - Danfoss EKE 1C Installation Manual

Related products

MMIGRS2 Display
User interface module MMIGRS2 Display
Pressure Transducer
AKS Pressure Tranducer
Available with ratiometric and 4 – 20 mA.
NSK
Ratiometric pressure probe
XSK
Pressure probe 4 – 20 mA
ACCCBI Cable
ACCCBI cables for MMI display and gateway.
© Danfoss | Climate Solutions | 2023.10
Power Supply
AK-PS
Input: 100 – 240 V AC, 45 – 65 Hz
Output: 24 V DC: available with 18 VA, 36
VA and 60 VA
ACCTRD
Input: 230 V AC, 50 – 60 Hz
Output: 24 V AC, available with 12 VA,
22 VA and 35 VA
Temperature Sensor
PT 1000
AKS is a High precision temp. sensor
AKS 11 (preferred), AKS 12, AKS 21
ACCPBT PT1000
NTC sensors
EKS 221 ( NTC-10 Kohm) MBT 153
ACCPBT
NTC Temp probe (IP 67 /68)
Stepper motor valves
EKE is compatible with Danfoss stepper
motor valves i.e Danfoss ETS 6, ETS, KVS,
ETS Colibri®, KVS colibri®, CTR, CCMT
MMIMYK Gateway
MMIMYK device is used as a gateway
to connect EKEs and the PC tool i.e
KoolProg software for parameter
setting or data logging.
M12 cable
M12 Angle cable to connect
Danfoss stepper motor valve and
EKE controller
AN269954243889en-000905 | 16