Overview Of The Operating Menu; Working With The Operating Menu - Sennheiser SK 300 Instruction Manual

Using the operating menu

Overview of the operating menu

Main menu
"Menu"
Sensitivity
Frequency Preset
Name
Auto Lock
Advanced
Exit
Display Function of the menu item
Main menu "Menu"
Sensitivity Adjusts the sensitivity "AF"
(see page 21)
Frequency Preset Sets the frequency bank and the
channel (see page 22)
Name Enters a freely selectable name
(see page 22)
Auto Lock Activates/deactivates the lock mode
(see page 23)
Advanced Calls up the extended menu
"Advanced
Exit Exits the operating menu and returns
to the current standard display
Extended menu "Advanced Menu"
Tune Sets the transmission frequencies for
the frequency banks "U1" to "U6"
(see page 23)
Sets the channel and the transmission
frequency for the frequency banks
"U1" to "U6" (see page 24)
Mute Mode Sets the mode for the
(see page 25)
MIC LED Sets the behavior of the
the RMS 1 external mute switch
(see page 26)
RF Power Adjusts the transmission power
(see page 26)
Pilot Tone Activates/deactivates the pilot tone
transmission (see page 27)
LCD Contrast Adjusts the contrast of the display
panel (see page 27)
Reset Resets the settings made in the
operating menu (see page 27)
18
Extended menu
"Advanced Menu"
Tune
Mute Mode
MIC LED
RF Power
Pilot Tone
LCD Contrast
Reset
Software Revision
Exit
Menu" (see page 23)
MUTE switch
STATUS LED of
Display Function of the menu item
Software Revision Displays the current software revision
(see page 28)
Exit Exits the extended menu
Menu" and returns to the main menu

Working with the operating menu

If the lock mode is activated, you have to deactivate
it in order to be able to work with the operating
menu (see page 13).
By way of example of the "Sensitivity" menu, this section
describes how to use the operating menu.
Changing from a standard display to the operating menu
Press the SET button.
The current standard display is replaced by the
main menu.
The last called up menu item is displayed.
Selecting a menu item
Press the UP/DOWN button
the "Sensitivity" menu item.
The current setting of the selected menu item is
displayed:
Menu
Sensitivity
–12 dB
Changing and storing settings
SET
Menu S e n s i t i v i t y
S e n s i t i v i t y
–12 dB
Call up Select the desired
"Sensitivity" setting
"Stored"
Press the SET button to call up the menu item.
Press the UP/DOWN button
input sensitivity.
Press the SET button to store the setting.
Canceling an entry
Press the ON/OFF
ON/OFF
The current standard display appears on the
display panel.
Using the operating menu
"Advanced
/ to change to
S e n s i t i v i t y
– 12 dB –36 dB
Store the setting
SET
/ to adjust the
button to cancel the entry.
19