Important Safety Instructions; The Sk 300 G3 Bodypack Transmitter; The Frequency Bank System - Sennheiser SK 300 Instruction Manual

Important safety instructions

Important safety instructions
• Read this instruction manual.
• Keep this instruction manual. Always include this
instruction manual when passing the product on to third
parties.
• Heed all warnings and follow all instructions in this
instruction manual.
• Use only a cloth for cleaning the product.
• Do not place the product near any heat sources such as
radiators, stoves, or other devices (including amplifiers)
that produce heat.
• Only use attachments/accessories
Sennheiser.
• Refer all servicing to qualified service personnel.
Servicing is required if the product has been damaged in
any way, liquid has been spilled, objects have fallen
inside, the product has been exposed to rain or mois-
ture, does not operate properly or has been dropped.
• WARNING: To reduce the risk of short circuits, do not use
the product near water and do not expose it to rain or
moisture.
Intended use
Intended use of the ew 300 G3 series products includes:
• having read these instructions especially the chapter
"Important safety instructions",
• using the products within the operating conditions and
limitations described in this instruction manual.
"Improper use" means using the products other than as
described in this instruction manual, or under operating
conditions which differ from those described herein.
2
specified by

The SK 300 G3 bodypack transmitter

The SK 300 G3 bodypack
transmitter
This bodypack transmitter is part of the evolution wireless
series generation 3 (ew G3). With this series, Sennheiser
offers high-quality state-of-the-art RF transmission
systems with a high level of operational reliability and ease
of use. Transmitters and receivers permit wireless transmis-
sion with studio-quality sound.
Features of the evolution wireless 300 G3 series:
• Optimized PLL synthesizer and microprocessor
technology
• HDX noise reduction system
• Pilot tone squelch control
• True diversity technology
• Switching bandwidth of 42 MHz
• Increased immunity to intermodulation and
interferences in multi-channel operation

The frequency bank system

The bodypack transmitter is available in 7 UHF frequency
ranges with 1,680 transmission frequencies per frequency
range:
Range GB:
606 – 648
Range A:
Range G: Range B:
516 – 558 566 – 608 626 – 668
Each frequency range (A–E, G, GB) offers 26 frequency
banks with up to 24 channels each:
Channel 1 – frequency preset
Channel 2 – frequency preset
Frequency bank 1... 20
Channel 24 – frequency preset
Channel 1 – freely selectable frequency
Channel 2 – freely selectable frequency
Frequency bank U1 ... U6
Channel 24 – freely selectable frequency
Each of the channels in the frequency banks "1" to "20" has
been factory-preset to a fixed frequency (frequency
preset).
The factory-preset frequencies within one frequency bank
are intermodulation-free. These frequencies cannot be
changed.
For an overview of the frequency presets, please refer to the
supplied frequency information sheet. Updated versions
of the frequency information sheet can be downloaded
Range C: Range D: Range E:
734 – 776 780 – 822 823 – 865
3