These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid the installation of the following product: EL6060 SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
Page 3
Feed the mains cable through the cable entry point • • Feed the mains cable through the cable entry point Ensuring correct polarity is observed, carefully wire as shown in Fig.1. Two cables can be inserted into • Ensuring correct polarity is observed, carefully wire as shown in Fig.1. Two cables can be inserted into •...
WARNING This product must be disconnected from the circuit if subjected to any high voltage or insulation testing. Irreparable damage will occur if this instruction is not followed. GENERAL GENERAL This product contains a light source of energy efficiency class D to Regulation (EU) No. 2019/2015 and (UK) This product contains a light source of energy efficiency class D to Regulation (EU) No.
Page 5
SUPPLIED BY: (UK) MANUFACTURER ML ACCESSORIES LTD, UNIT E CHILTERN PARK, BOSCOMBE ROAD, DUNSTABLELU5 4LT, WWW.MLACCESSORIES.CO.UK (EU) AUTHORISED REPRESENTATIVE SLV LIGHTING GROUP, DAIMLERSTRASSE 21-23, 52531 ÜBACH-PALENBERG, GERMANY EMAIL: EPREL@GROUP.SLV.COM >85 25°C AKOCT22_V1...
Need help?
Do you have a question about the EL6060 and is the answer not in the manual?
Questions and answers