Introduction; Safety Information - Flash EVENT Series User Manual

THANK YOU FOR PURCHASING TubeFX 360. FOR SAFETY RE-
ASONS AND TO ENSURE THE TROUBLE-FREE OPERATION, CARE-
FULLY READ THE INSTRUCTIONS.
Please keep this User Manual
for future consultation. If you sell
the fixture to another user, be sure
that they also receive this instruc-
tion booklet.
Unpack and check carefully the-
re is no transportation damage be-
fore using the fixture.
Before operating, ensure that
the voltage and frequency of po-
wer supply match the power
requirements of the fixture.
It's important to ground the
yellow/green conductor to earth
in order to avoid electric shock.
Disconnect main power before
servicing and maintenance.
Use safety chain when fixes this
fixture. Don't handle the fixture by
taking its head only, but always by
taking its base.
Maximum ambient temperature
is: 40°C Don't operate it where the
temperature is higher than this.
I N T R O D U C T I O N
S A F E T Y I N F O R M AT I O N
In the event of serious ope-
rating problem, stop using the
fixture immediately. Never try
to repair the fixture by your-
self.
Repairs carried out by unskil-
led people can lead to damage
or malfunction. Please contact
the nearest authorized techni-
cal assistance center. Always
use the same type spare parts.
Do not connect the device
to any dimmer pack.
Do not touch any wire during
operation and there might be a
hazard of electric shock.
To prevent or reduce the risk
of electrical shock or fire, do
not expose the fixture to rain
or moisture.
The housing must be repla-
ced if they are visibly damaged.
Do not look directly at the li-
ght spot while the fixture is on.
3