Introduction; Safety Information - Flash FL-202 BEAM 5R Manual

1

INTRODUCTION

Thank you for purchasing Moving Head FL-202 BEAM 5R. For safety reasons and to ensure the
trouble-free operation, carefully read the instructions.
2

SAFETY INFORMATION

1. CAUTION ! Avoid looking directly into the light source (meant especially for epileptics)!
2. CAUTION ! Keep away from fire!
3. Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.
4. Do not use the device in high humidity conditions and at temperatures above 40° C
5. The device must be installed on stable structures
6. WARNNING! Minimum distance of inflammable materials from the surface: 12m.
7. To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
8. Do not spill water or other liquids into or on to your unit.
9. During long periods of non-use, disconnect the units main power.
10. It should be installed in a well-ventilated place, at a distance of 50cm or more with the walls.
At the same time, please check if the fan and ventilation holes are unobstructed.
11. Disconnect the power supply before installation.
www.flash-butrym.pl
2