Setting Up The Wiced Sdk - Broadcom WICED Quick Start Manual

Quick Start Guide
WICED

Setting Up the WICED SDK

The WICED SDK is available for download from the Broadcom® WICED website or from the Broadcom®
Customer Support Portal.
To use the SDK, the following steps must be performed:
1. Download and install the WICED SDK and IDE
2. Choose and compile an application
3. Load the application into the WICED module on the WICED evaluation board
4. Run the application
5. Debug the application
This section provides instructions for Step 1 for Windows® and Mac OS X. Steps 2-5 are discussed in Section 4.
Note: Do not plug the WICED Evaluation Board into the development computer prior to installing the
WICED Development System. Doing so may cause the incorrect driver to load.
Broadcom
®
January 15, 2014 • MMPWICED-QSG203-R
Setting Up the WICED SDK
Page 9