Build - Broadcom WICED Quick Start Manual

Quick Start Guide
WICED

Build

1. In the Eclipse Workspace Launcher window, enter the workspace directory, click OK, and wait for the main
Eclipse program window to open. If a splash screen tab is displayed, close it by selecting X in the upper-left
corner.
2. From the File menu, select New Makefile Project with Existing Code.
3. In the Import Existing Code window, click Browse and navigate to the WICED-SDK directory.
4. Click Finish; the WICED-SDK appears in the Eclipse Project Explorer pane on the LEFT of the screen.
5. In the Eclipse program window, in the RIGHT pane, at the top next to the Outline tab, select the Make Target
tab (green bull's eye icon)
6. Right-click on the WICED-SDK root directory name, and then, from the shortcut menu, select New.
7. In the Create Make Target | Target Name field, type the following:
snip.scan-BCM943362WCD4-debug download run
8. Click OK to dismiss the window.
9. In the Make Target tab:
a. Left-click the Open Folder icon.
b. Left-click the arrow next to WICED-SDK to view the target that was just created.
10. Double-click the newly created scan make target. The scan application compiles and downloads to the
WICED evaluation board. Progress is shown in the Console tab, in the lower window pane.
Figure 5 shows an example of the Eclipse program window with the Apps/snip/scan.c source together with the
results of a JTAG download session in the console window.
Broadcom
®
January 15, 2014 • MMPWICED-QSG203-R
Importing the WICED SDK into Eclipse
Page 25