Verifying Driver Installation; Troubleshooting - Broadcom WICED Quick Start Manual

Quick Start Guide
WICED

Verifying Driver Installation

To verify that driver installation has completed successfully, do the following:
1. Open the Device Manager (right-click My Compute and select Properties).
2. In the System Properties window, select Hardware and then Device Manager.
a. The WICED USB Serial Port is listed under MY-LAPTOP\Ports (COM & LPT, shaded yellow).
b. The WICED USB JTAG Port is listed under MY-LAPTOP\WICED USB JTAG Devices (shaded blue).
The Device Manager window identifies the WICED USB Serial COM port as COM21. The assigned port
number varies between systems.

Troubleshooting

If an error occurs during the automatic driver installation process, the driver may be manually installed from the
<WICED-SDK>\Drivers directory.
If the WICED evaluation board still does not appear in the Device Manager, verify the 3V3 LED is turned ON
and/or replace the USB cable.
Broadcom
®
January 15, 2014 • MMPWICED-QSG203-R
Setting Up the WICED SDK
Page 11