THOMSON ROC 740 Manual page 13

Roc740_GB 25/04/01 16:05
Programming timer-controlled function controls
The remote control allows automatic operation of two controls per mode, for example "On" and "Off" under the
given day.
1. Hold down the
SET UP
2. Release the key.
SET UP
3. Press several times on the
4. Press the mode key (
for set-timed operations.
5. Press the key for that control to be executed at a certain time, for example B to shut off the
TV set, if you chose
TV
panel.
6. Program the time (hours, minutes) for auto shut off using the
the hour number you selected, with the
7. Select the required minutes number, and validate using the
The next Timer operation will then be displayed for programming.
8. The following Timer operation display can be aborted by pressing on
repeat procedures 5 to 7 and validate any selection with the
9. Timer programming is now finished. Your ROC 740 will display the day and time.
The "( T )" display on the LCD panel shows that at least one timer program has been set.
Erasing all programmed selections and settings
1. Hold down the
SET UP
2. Release the key.
SET UP
3. Press several times on the
4. Validate with the
OK
5. All programmed selections are now erased. Your
NAVILIGHT navigation
The THOMSON NAVILIGHT browser function lets you easily access menus for any TV set or VCR equipment having THOMSON
NAVILIGHT.
1. Turn on the equipment item you want to control.
2. Select the equipment item type by mode (
selected).
3. Press once on the
MENU
4. Navigate the setting menus by first pressing
5. Validate any selection with
6. Quit menu browsing by pressing once on the
Technical specifications
Operating voltage
Emission
Operating temperature
Dimensions
Maximum number of remote controls programmable : 3 remote controls of under 50 keys each.
THOMSON multimedia shall not be responsible if the player is not used according to this manual.
Page 6
key ( ) until "Setup" displays on the LCD panel.
17
key until "Timer 1", "2", "3" or "4" displays.
SET UP
, , , etc...) for the equipment item you want to program
TV VCR SAT
mode. The time select display will blink on the
key ( ). The minutes number will then blink.
OK 22
key ( ) until "Setup" displays on the LCD panel.
17
key until "Cancel 1", "2", "3" or "4" display.
SET UP
key.
ROC 740
, or
TV VCR SAT
key ( ).
8
(
SET UP 17
+ ( ).
SET UP OK 22
key (
EXIT
: 6 Volts / 4 x 1.5V AAA batteries
: infrared
: 0°C to 30°C
: 215 x 82 x 30 mm
You can contact THOMSON by dialing: 0845 601 3093
(For Great-Britain, all calls will be charged at local rate)
www.thomson-europe.com
's LCD display
ROC 740
key ( ) and first validate
FFWD 19
key.
OK
, or, where you want to program other Timer controls,
SET UP
key.
OK
will display the day and time.
). For a first ensure the TV set is in AV mode (the Scart outlet
VCR
), then use the , , and
UP DOWN LEFT
).
23
6
mode and for a
TV
Setup
Mode ?
Timer 1
Mode ?
Setup
Mode ?
Cancel 1
Mode ?
key (key and ).
RIGHT 6 9