THOMSON ROC 740 Manual page 9

Roc740_GB 25/04/01 16:05
What is this remote control for ?
Your remote control is a Universal Controller able to be used with most any domestic audio/video equipment you will find on
ROC 740
sale (TV sets, VCRs, satellite receivers, hi-fi equipment, CD and DVD players, etc.). Using this remote controller can replace up to 8
others. There are 8 selection choices (
: control of a TV set,
TV
: control of a VCR,
VCR
: control of a satellite receiver,
SAT
: control of a DVD player,
DVD
: control of a CD player,
CD
: control of an amplifier/tuner,
AUDIO
: control of a seventh item (eg. a second VCR),
AUX 1
: control of an eighth item.
AUX 2
Before being utilizable for controlling an equipment item you must enter the equipment-specific code for that item. Codes are as listed
in the special documentation. Where the item's manufacturer is not listed you can "download" the right codes for such items, using that
item's original remote control and thanks to
controllers having up to 50 separate keys or functions.
and are customizable. These functions can be programmed to store the code for 1 of the 6 other possible equipment items,
AUX 1 AUX 2
such as , , , etc., making it possible to remote control a second item of the same type.
TV VCR SAT
As a general rule your
ROC 740
Inserting the batteries
Insert the 4 supplied AAA batteries as shown in the diagram. Make sure you insert the batteries the right way round, respecting polarity
(negative battery base contact against the spring).
Backlighting the keys
Press once on key ( ) and keys will be backlit for a period of 5 seconds. If, in that period, you press another key the backlit period
16
will be increased by 5 seconds. To increase for another 5 seconds press again on the backlighting key (
Infrared signal
The ( ) symbol will display whenever you control an equipment item. This symbol shows you the
remote control is operating correctly. If by any chance a key remains in the command ("on")
position, for example if the controller is firmly lodged between two cushions, infrared signals will
automatically shut off to save battery power.
Code list
The code list for your remote controller has codes for a wide range of usual items. The code list is supplied as a separate document.
Read the code list to find the code for your TV set, VCR, CD or DVD player, your satellite receiver, etc.
Sound volume
Keys indicated ( and
24 25
mode for operating a VCR or DVD player at the same time. You do not need to switch to
To be able to make volume adjustment when using the
You cannot vary volume in
Remote control display
When you use the remote control, the LCD display will show:
- mode selected ("TV", "VCR", "SAT", etc...),
- day,
- time.
LCD displays will shut off after about 1 minute after use (battery saving).
Page 2
) for operating mode:
2
's learning capability. Your
ROC 740
remote control can operate any function that the item's original remote control can operate.
) can also adjust the volume of your TV set, even if you are using your remote control in
AUX
mode with these keys.
CD
RECORD
can acquire and store up to 3 other-equipment
ROC 740
TV
mode you must program the
AUX 1
TV
Fr
TV
Fr
2
ON
B
TV VCR SAT
DVD CD AUDIO AUX1 AUX2
PAUSE
SET UP
).
16
TV 123
Fr 12:48
mode or
VCR
mode to adjust TV sound settings.
or keys for or .
AUX 2
VCR DVD
12:48
12:48
TV
Fr 12:48
DVD