Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Eliminator Lighting DOTZ TPAR SYSTEM PLUS
Summary of Contents for Eliminator Lighting DOTZ TPAR SYSTEM PLUS
- Page 1 DOTZ TPAR SYSTEM PLUS User Manual...
- Page 2 All non-Eliminator brands and product names are trademarks or registered trademarks of their respective companies. Eliminator Lighting and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic...
-
Page 3: Table Of Contents
C O N T E N T S General Information Limited Warranty (USA Only) Warranty Registration | Features Safety Guidelines System Menu Primary-Secondary Configuration | Universal DMX Control Foot Controller Dotz RF Remote DMX Setup DMX Traits Photometric Chart | Power Cord Daisy Chain Dimmer Curves Alternate Lighting Installation Fuse Replacement | Cleaning | Trouble Shooting... -
Page 4: General Information
INTRODUCTION The Dotz TPar System Plus includes high performance, DMX intelligent, moving head LED fixtures, which are well suited for use in retail stores, displays, mood, architectural, interior and exterior decoration, and clubs. -
Page 5: Limited Warranty (Usa Only)
ADJ Products, LLC Service Department at 800-322-6337. Send the product only to the Eliminator Lighting factory. All shipping charges must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this warranty, Eliminator Lighting will pay return shipping charges only to a designated point within the United States. -
Page 6: Warranty Registration | Features
WA R R A N T Y R E G I S T R AT I O N This product carries a 2 year (730 days) limited warranty. Please fill out the enclosed warranty card www.adj.com. to validate your purchase and warranty. You may also register this product online at All returned service items, whether under warranty or not, must be freight pre-paid and accompanied by a return authorization (R.A.) number. -
Page 7: Safety Guidelines
S A F E T Y G U I D E L I N E S • To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture • Do not spill water or other liquids into or on to your unit. •... -
Page 8: System Menu
S Y S T E M M E N U BUILT-IN PROGRAMS STATIC COLOR Static color Flash adjustable CL : RGB Flash 00 - 99 DREAM Seven color dreaming Speed and flash adjustable Speed 00 - 99 Flash 00 - 99 METEOR Seven color flow Speed and flash adjustable... - Page 9 S Y S T E M M E N U The LCD backlight will shut off after 30 seconds. To re-active the backlight, press and hold the MODE button for 5 seconds. DMX Mode - Set the DMX Address and DMX Channel Mode. 1.
- Page 10 S Y S T E M M E N U Pixel Flip - Set the LEDs to begin illuminating at either the left side or the right side of the unit when running in DMX mode. 1. Press the MENU button until “Pixel Flip” is displayed, then press ENTER. 2.
-
Page 11: Primary-Secondary Configuration | Universal Dmx Control
P R I M A R Y S E C O N D A R Y C O N F I G U R AT I O N This function will allows you to link units together to run in a Primary-Secondary set-up, in which one unit will act as the controlling unit, and the others will react to the controlling unit’s built-in programs. -
Page 12: Foot Controller
F O O T C O N T R O L L E R In order to use the Foot Controller to operate the fixture, use the provided cable to connect the Foot Controller to the fixture, and set the fixture to its “Secondary” setting. To activate the Foot Controller, press any pedal once. -
Page 13: Dotz Rf Remote
D O T Z R F R E M O T E The Dotz RF remote includes many different functions and allows the user to control the fixture from afar. To use the remote, the remote receiver must first be activated, as detailed in the System Menu section of this manual. -
Page 14: Dmx Setup
D M X S E T U P Power Supply: Each of these devices contains an automatic voltage switch, which will automatically sense the voltage when the device is plugged into a power source. With this switch, there is no need to worry about the correct power voltage, and this unit can be plugged in anywhere. - Page 15 D M X S E T U P Notice: Be sure to the figures below when making your own cables. Do not use the ground lug on the XLR connector. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing.
- Page 16 D M X S E T U P DMX Addressing: All fixtures should be given a DMX starting address when using a DMX controller, in order to ensure that the correct fixture responds to the correct control signal. This digital starting address is the channel number from which the fixture starts to “listen”...
-
Page 17: Dmx Traits
D M X T R A I T S CHANNEL FUNCTION VALUES 12Ch 18Ch 000 - 255 Red, 0% to 100% 000 - 255 Green, 0% to 100% 000 - 255 Blue, 0% to 100% 000 - 255 Red 1, 0% to 100% 000 - 255 Green 1, 0% to 100% 000 - 255 Blue 1, 0% to 100% 000 - 255 Red 2, 0% to 100%... - Page 18 D M X T R A I T S CHANNEL FUNCTION VALUES 12Ch 18Ch Color Macros and Programs (continued) 216 - 223 Color Flow 7 224 - 231 Color Flow 8 232 - 239 Color Flow 9 240 - 255 Sound Active Master Dimmer / Program Speed / Sound Sensitivity 000 - 255 Master Dimmer, 0% to 100% 000 - 255 Program Speed, slow to fast...
-
Page 19: Photometric Chart | Power Cord Daisy Chain
P H O T O M E T R I C C H A R T Beam angle 25° Field angle 35° Intensity(LUX) Red LEDs 2400 Green LEDs 2760 Blue LEDs 4130 1357 Full LEDs 8650 2680 1345 25° Diameter(m) 0.65 1.08 1.83... -
Page 20: Dimmer Curves
D I M M E R C U R V E S... -
Page 21: Alternate Lighting Installation
A LT E R N AT E L I G H T I N G I N S TA L L AT I O N One of this system’s special features is the ability to mount two light effects on top of the T-bar. These lights can then be powered by plugging the power cords directly into the bar, with power sockets lo- cated on the right side and left side. -
Page 22: Fuse Replacement | Cleaning | Trouble Shooting
F U S E R E P L A C E M E N T Locate and remove the unit’s power cord, then locate the fuse holder inside the power socket. Insert a flat-head screw driver into the power socket and gently pry out the fuse holder. Remove the bad fuse and replace with a new fuse of the same rating. -
Page 23: Specifications
S P E C I F I C AT I O N S • COB LED Par Wash System with 4 Par fixtures • COB Technology (Chip On Board) produces powerful, smooth RGB color mixing with rich palettes of color •...
Need help?
Do you have a question about the DOTZ TPAR SYSTEM PLUS and is the answer not in the manual?
Questions and answers