Eliminator Lighting Trio Par LED RG Manual

TRIO PAR LED RG
CAUTION! Please read and under-
stand these instructions before
installing or operating this unit.
Operating Instructions:
The Trio Par LED RG has been tested at the factory, there is no assembly required. The unit is ready
to be plugged into a power outlet. This unit has 4 DMX channel modes; 6/10/26/30 channels. It has
6 operating modes; RGBW Dimmer mode, color change mode, fade mode, pulse mode, sound
active mode, or DMX mode.
Fuse Replacement: Disconnect the unit from its power source. Remove the power cord from the unit.
Once the cord has been removed, you will find that the fuse holder is located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry out the fuse holder. Remove the
bad fuse and replace with a new one. The fuse holder also has a holder for a spare fuse.
1 Year Limited Warranty:
1 year limited warranty covers manufacturing defects only. Serial number, place of purchase with
dated valid receipt must be submitted at time of service. Eliminator Lighting warranty does not cover
items or parts prone to wear and tear: lamps, fuses, brushes and belts. Eliminator Lighting warranty
is only valid with-in the United States.
©Eliminator® Los Angeles, CA. - www.EliminatorLighting.com
SPECIFICATIONS:
Model:
Voltage:
LEDs:
Weight:
Size:
Working Position:
Duty Cycle:
DMX Channels:
Colors:
Warranty:
Caution! Never open unit when in use. Always
disconnect main power before replacing fuse.
Remember to always replace with the exact same
type fuse.
Eliminator Lighting warranty is valid from the date of purchase. Our
Trio Par LED RG
100V-240V 50/60Hz
6 x 9W RGBW LEDs
72 SMD White LEDs
Red/Green Laser
2lbs./ 0.9kgs.
9.8"(L) x 3.5"(W) x 9.8"(H)
Any Safe position
None
4 DMX Channel Modes:
6/10/26/30 Channels
RGBW
1 Year