1170 5G Mmwave Wireless Wan Antenna Kit, Cable Assembly, Ffc Cable And Thermal Pad (Right) (For Selected Models) - Lenovo ThinkPad X13s Gen 1 Hardware Maintenance Manual

• "1060 Heatsink assembly" on page 65
• "1100 Camera cable bracket" on page 68
• "1110 LCD cable bracket" on page 69
• "1150 System board" on page 74
Removal steps of the wireless LAN antenna assembly
Attention: When you route the cables, ensure that they are not subject to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Note: For antenna locations, see "Antenna locations" on page 73.
1170 5G mmWave Wireless WAN antenna kit, cable assembly, FFC cable
and thermal pad (right) (for selected models)
For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 59
• "1020 Built-in battery" on page 60
• "1030 Thermal bracket (for selected models)" on page 61
• "1060 Heatsink assembly" on page 65
• "1080 Speakers assembly" on page 67
• "1130 Wireless WAN antennas (for selected models)" on page 71
• "1140 5G mmWave Wireless WAN antenna bracket (left and right) (for selected models)" on page 73
Note: For computer models with the 5G mmWave Wireless WAN card, you need to do calibration after you
remove, replace or reassemble the antenna kit, cables and thermal pad. For details, see "5G mmWave
calibration (for selected models)" on page 54.
78
ThinkPad X13s Gen 1 Hardware Maintenance Manual