Table of Contents
Advertisement
Advanced functions
Time
Return
Sleep timer
Time reference
Time
Date
Calendar
Wake up timer
Wake up time
Wake up channel
EN
Turn off timer
Turn off time
Calendar
Return
Month
Year
Today
Mon
Tue
Wed
Thu
5
6
7
12
13
14
19
20
21
26
27
28
Setting the time
Time
The
automatic turn-off or wake-up timer and to view the calendar.
Display the
Off
and press
04 BBC4
12:34
01/06/05
Setting the time and date
...
Once
1.
Select the
07:00
10 CNN
2.
Select a channel which displays Teletext so that the time and date from this can be used
Once
as a reference, by using the
12:00
numeric buttons on the remote control.The time and date appear in a couple of
seconds if they are available on the channel that has been selected.
3.
If the time and date are not supplied by Teletext they will not appear under the
and
Select the
buttons.The setting
Select the
DD/MM/YY.
Notes:
- In the event of the power supply being cut off (the TV set is unplugged or there is an electrical
fault), the time and date will be lost, if they have been entered manually.You need to enter
them again. In this instance, we advise you to consult a channel which has this information and
to check that it is correct.
- If the time has not been set, when you select the
message appears prompting you to set the time.
Using the calendar
This menu allows you to look for a particular date.
1.
Select the
appears.
September
2.
2005
Under
...
3.
Under
Fri
Sat
Sun
The calendar displays the selected month.
1
2
3
4
8
9
10
11
To display the calendar for the current month, select the
15
16
17
18
confirm.The current day is automatically selected if the date is available.
22
23
24
25
29
30
Programming a turn-off timer
You can programme the TV set's turn-off timer by setting a period of time after which or a
specific time when the TV set goes into standby mode.
To set a period of time after which the TV set goes into standby mode:
1.
Select the
2.
Using the
standby mode (4 hours maximum, at 5-minute intervals).To disable this function, select
Off
Note:You can access this function directly by pressing the
control.
To select a time for the TV set to go into standby:
1.
Select the
2.
Using the
this function.
3.
Select the
the time at which you want the TV set to go into standby mode.
When one of these functions (Sleep timer or Turn off timer) is on, a message appears one
minute before the television set goes into standby mode. Press any button on the remote
control to cancel standby mode.
Press
OK
to confirm.
menu allows you to set the time and date on your TV set, to programme an
OVERVIEW
menu by pressing the
OK
to confirm.
Time reference
option.
Date
options.You will then have to enter them manually.
Time
option and enter the time using the numeric buttons or the
--
appears under the
Date
option and enter the date using the numeric buttons in the format:
Calendar
option and press
Month
select the month you want from the list using the
Year
select the year you want from the list using the
Sleep timer
option.
buttons, set the period after which the TV set automatically goes into
.
Turn off timer
option.
Once
buttons, choose
Turn off time
option. Using the numeric buttons or
EXIT
to close the menu.To return to the previous menu, select
14
MENU
button. Select the
buttons or entering a channel number using the
Time reference
option.
Time
option from the
Calendar
OK
to confirm.The
Today
option and press
SLEEP
button on your remote
Daily
or
from the list. Select
Time
option
Time
OVERVIEW
, a
screen
buttons.
buttons.
OK
to
Off
to disable
buttons, enter
Return
and press
Advertisement
Table of Contents
