IFC130-P_EN
5/08/05
9:48
Advanced functions
Picture
Return
Brightness
Colour
Contrast
Tone
Auto-adjustment
Phase
Clock
Vertical position
Horizontal position
EN
PC mode
Other settings
Return
Photo Mode
Film mode
NTSC tint
Automatic format
Page 12
In PC mode you can access a number of specific functions:
Auto-adjustment
Phase
Clock
,
Running
message
Phase, Clock
Neutral
enhance picture quality.
...
Vertical position
Horizontal position
screen.
Other settings
Note: This menu is only available for TV channels and AV programmes.
Other settings
Select the
settings
menu appears with the following options:
Photo Mode
still pictures are detected automatically and their resolution enhanced. Check the box by
On...
OK
pressing
Note: This function is only available for certain audio-visual sources.
Film mode
quality. Select an option from the list using the
Notes:
Advanced
- The
- This function is only available for certain audio-visual sources.
NTSC tint
buttons.
Note: This function is only available for NTSC audio-visual sources.
Automatic format
the box by pressing
Note: This function is only available for certain audio-visual sources.
EXIT
Press
OK
to confirm.
: this option allows you to automatically adjust the following functions:
Vertical position
Horizontal position
,
and
appears. Once the setting is implemented the message
: adjust these settings as required using the
: use the
buttons to move the picture vertically on the screen.
: use the
buttons to move the picture horizontally on the
Picture
option from the
: improves quality and stability of still pictures.When this function is enabled
to enable this function.
: detects that the programme being broadcast is a film and enhances picture
option is selected by default.
: is used to adjust the picture's tint. Adjust these settings as required using the
: automatically applies the appropriate format to the picture. Check
OK
to enable this function.
to close the menu.To return to the
12
. Press
OK
until the
Done
appears.
buttons in order to
OK
Other
menu and press
.The
buttons.
Picture
Return
menu, select
and press