6.3
WPS
6.3.1
Overview
The WPS function enables wireless devices, such as smartphones, to quickly and easily connect to
Wi-Fi network of the router without entering the Wi-Fi password. There are two ways to connect
devices to the Wi-Fi network.
Connect devices to the Wi-Fi network using the WPS button
−
Connect devices to the Wi-Fi network through the web UI of the router
−
To enable or disable the WPS function,
Settings > WPS.
−
This function is only applicable to WPS-enabled wireless devices.
−
If the WPS function is disabled, the internet cannot be connected through the WPS function of
the router.
6.3.2
Connect devices to the Wi-Fi network using the WPS
button
Find the WPS/RST button on the rear panel of the router, and hold it down for 1 to 3
Step 1
seconds. The Wi-Fi indicator blinks slow.
Configure the WPS function on your wireless devices within 2 minutes. Configurations on
Step 2
various devices may differ (Example: HUAWEI P10).
Find Settings on the smartphone.
1.
Tap WLAN.
2.
Tap , and choose WLAN settings.
3.
log in to the web UI of the
50
Document Version: V1.1
router, and navigate to Wi-Fi