If you fail to access the internet, refer to
Parameter description
Parameter
Failover
Connection Type
DNS Settings
5.2.3
Access the internet with static IP address information
When your ISP provides you with information including IP address, subnet mask, default gateway
and DNS server, you can choose this connection type to access the internet.
Procedure:
Log in to the web UI of the
Step 1
Navigate to Internet Settings.
Step 2
Enable the Failover function.
Step 3
View internet status
Description
Specifies whether the Failover function is enabled.
Specifies how your router connects to the internet, including:
−
PPPoE: Select this type if you access the internet using the PPPoE account
and PPPoE password.
−
Dynamic IP Address: Select this type if you can access the internet by
simply plugging in an Ethernet cable.
−
Static IP Address: Select this type if you want to access the internet using
fixed IP information.
Specifies the obtaining method of WAN DNS address, which is Automatic by default.
−
Automatic: Obtain a DNS server address from the DHCP server of the
upstream network.
−
Manual: Configure the DNS server address manually.
router.
to find a solution.
40
Document Version: V1.1