Installation; Pre-Installation Instructions; Installation Procedure - Mitsubishi Electric 800 Series Instruction Manual

2

INSTALLATION

2.1

Pre-installation instructions

Check that the inverter's input power and the control circuit power are both OFF.
Caution
 Do not mount or remove the control terminal option while the input power is ON. Doing so may damage the inverter or the
control terminal option.
 To avoid damage due to static electricity, static electricity in your body must be discharged before you touch the product.
2.2

Installation procedure

(1) Loosen the two mounting screws at the both side of the standard control circuit terminal block. (These screws cannot be
removed.)
Slide down the control circuit terminal block to remove it.
Loosen the screws
23
INSTALLATION
2