Parameter Related To Encoder Pulse Dividing Output - Mitsubishi Electric 800 Series Instruction Manual

8.2

Parameter related to encoder pulse dividing output

Pr.
Pr. Name
group
Control terminal option-
863 M600 Encoder pulse division
ratio
• Division waveform by division ratio
Both ON-OFF width is division times. (50% duty)
• Pulse waveform example at 1000 pulse input when Pr.863 = "2"
NOTE
• Control of forward rotation/reverse rotation by phase difference between A phase and B phase.
When A phase is 90° advanced as compared to B phase: forward rotation
When A phase is 90° behind as compared to B phase: reverse rotation
Initial Setting
value range
1 1 to 32767
Division ratio
A-phases
1/1 B-phases
2 divisions
Division ratio
A-phases
1/2
B-phases
Description
The encoder pulse signal at the motor end can be divided in division
ratio set in Pr.863 and output.
Use this parameter to make the response of the machine to be input
slower, etc.
(1000 pulses)
(500 pulses)
ENCODER PULSE DIVIDING OUTPUT
8
57