Preparing The Weight Stack And Additional Weight Sensor - Technogym UNITY MINI Manual

4.3 PREPARING THE WEIGHT STACK AND ADDITIONAL WEIGHT SENSOR

UNITY MINI_INSTALLATION MANUAL
REV 1.0 2016.11.28
Carefully clean the weight stack
(reference rh plate guide bar),
using a cloth on which a
degreaser has been sprayed.
Stick the white reflecting strip
so it is aligned with the right
plate guide bar of the weight
stack.
The perfect
alignment of the white
reflecting strip with the weight
stack sensor bar will be
checked.
Cut the white strip at the upper
and lower end of each plate,
using a cutter. Stick the white
strip at the ends of each plate.
17/43