Remove the LCD unit
Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the heat sink" on page 35
Remove the right fan. See "Remove the fans" on page 36
Step 1.
Disconnect the the EDP cable and the camera cable from the system board. Remove six screws.
Figure 27. Disconnect cables and remove screws
Screw specifications
M2.0 × L4.0
Step 2.
Lift the computer up a bit. Poke the strip cover with a stick to create a gap.
46
Lenovo Legion Slim 5 (14", 8) Hardware Maintenance Manual
Number of screws
6