Advantech EIS-S232 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Computer Hardware
  5. EIS-S232
  6. User manual
Advantech EIS-S232 User Manual

Advantech EIS-S232 User Manual

Fanless embedded box pc
Hide thumbs Also See for EIS-S232:
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
EIS-S232
Fanless Embedded Box PC

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EIS-S232 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Advantech EIS-S232

Summary of Contents for Advantech EIS-S232

  • Page 1 User Manual EIS-S232 Fanless Embedded Box PC...
  • Page 2 There is an English user manual included as a PDF file on the CD. Please disregard the Chinese hard copy user manual if the product is not to be sold and/or installed in China. Part No. 2006S23210 Edition 1 Printed in China March 2024 EIS-S232 User Manual...
  • Page 3 No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable.
  • Page 4 Product Warranty (2 years) Advantech warrants the original purchaser that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products that have been repaired or altered by persons other than repair personnel authorized by Advantech, or products that have been subject to misuse, abuse, accident, or improper installation.
  • Page 5 Technical Support and Assistance Visit the Advantech website at www.advantech.com/support to obtain the latest product information. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before calling: –...
  • Page 6 Power cable 3-pin 183cm, USA type 1702002605 Power cable 3-pin 183cm, EU type 1702031801 Power cable 3-pin 183cm, UK type 1700000237 Power cable, 3-Pin 183cm, PSE type AMK-A0035 2 x internal HDD bays kit (Max Height 15mm) EIS-S232 User Manual...
  • Page 7 12-36V S232- I3-10100E Optional Optional 2 2 PCI 01DS281 Expansion riser card maximum load: 30W. Please return to the authorized dealer for any installation, replacement, repair, update or service. Note! CPU/Memory/Storage and operating system bundled by request. EIS-S232 User Manual...
  • Page 8 The equipment should only be installed in a restricted access areas. DISCLAIMER: These instructions are provided according to IEC 704-1 stan- dards. Advantech disclaims all responsibility for the accuracy of any statements contained herein. Use a power cord connected to a socket-outlet with a grounded connection.
  • Page 9 This product is intended to be supplied by a UL Listed power supply suitable for use at minimum Tma 60° C (140° F) whose output meets ES1 (or SELV) and output is rated: 12-36Vdc, 16-6.3A. Please contact Advantech for further infor- mation.
  • Page 10 L'équipement ne doit être installé que dans une zone d'accès restreint. AVERTISSEMENT: Cet ensemble d'instructions est donné conformément à la norme CEI 704-1. Advantech décline toute responsabilité quant à l'exactitude des déclarations contenues dans ce. Au moyen d'un cordon d'alimentation connecté à une prise de courant avec mise à...

  • Page 11: Table Of Contents

    Table 2.6: JSETCOM3 (J1) COM3 RI Power Setting....14 Connectors....................15 2.3.1 EIS-S232 External I/O Locations ..........15 Figure 2.3 EIS-S232 Front and Rear I/O Connector Diagram ... 15 Figure 2.4 COM Connector............15 Table 2.7: COM Connector Pin Assignments......15 Table 2.8: COM Connector Pin Assignments......16 Figure 2.5 Ethernet Connector ..........
  • Page 12 3.2.6 Save & Exit ................. 92 Appendix A Watchdog Timer Sample Code ..93 EC Watchdog Timer Sample Code ............94 Appendix B Fixing the LAN Order......95 Problem Statement ................. 96 Addressing the LAN Order..............96 EIS-S232 User Manual...

  • Page 13: Chapter 1 General Introduction

    Chapter General Introduction This chapter details background information on the EIS-S232 series.

  • Page 14: Introduction

    A0035). Rugged Multi-Functional Design EIS-S232 adopts an advanced thermal design for its desktop processor solution. All models are fanless, and feature various quality features. These include wide operat- ing temperatures (-20 ~ 60° C/-4 ~ 140° F), diverse expandability options, and struc- tural strengthening.

  • Page 15: Product Features

     – 1 x Full size MiniPCIe (support mSATA and 1 with SIM) – 1 x M.2 (E key for Wi-Fi, suggested installation at Advantech manufacturing) – Add-on Card Slot: 2x PCI + 1x PCIe x16 – 1 x iDoor Module TPM: TPM2.0 (Optional)

  • Page 16: Chipset

    Wake-up from sleep states S3 – Maximum 500mA for each USB port Power Management ® Intel W480E Chip Supports:  – ACPI – ACPI-defined power states (processor driven C states) – ACPI Power Management Timer – SMI# generation EIS-S232 User Manual...

  • Page 17: Susi 4.0

    TPM: TPM 2.0  1.3.2 SUSI 4.0 SUSI API  DIO 16-bit programmable DIO  Watchdog Timer Multi-level WDT (set by Advantech iManager)  Programmable 1-255 sec/min  Hardware Monitor CPU Temperature/input Current/input Voltage  System Information Running HR/Boot record ...

  • Page 18: Mechanical Specifications

    Minimum Power Input: 12 ~ 36 V  Operating Environment Specifications 1.6.1 Operating Temperature With extended peripherals: -20 ~ 60° C (-4 ~ 140° F) with 0.7m/s air flow  1.6.2 Relative Humidity 95% @ 40° C (104° F) (non-condensing)  EIS-S232 User Manual...

  • Page 19: Storage Temperature

    1.6.3 Storage Temperature -40 ~ 85° C (-40 ~ 185° F)  1.6.4 Safety UL, CB, CCC, BSMI  1.6.5 CE/FCC Class B, CCC, BSMI  EIS-S232 User Manual...
  • Page 20 EIS-S232 User Manual...

  • Page 21: Chapter 2 Hardware Configuration

    Chapter Hardware Configuration...

  • Page 22: Introduction

    2.2.1 Jumper Description You may configure EIS-S232 to match the needs of your application by setting jump- ers. A jumper is a metal bridge used to close an electric circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 23: Jumper Location

    2.2.3 Jumper Location EIS-S232 User Manual...
  • Page 24 Figure 2.1 Jumper Layout Figure 2.2 Jumper Layout EIS-S232 User Manual...

  • Page 25: Jumper Settings

    Clear CMOS 2.2.4.3 MINI PCIE Power Setting for MPWR_SEL1 Table 2.4: MPWR_SEL1 Power Setting Part Number 1653003101 Footprint HD_3x1P_79_D Description PIN HEADER 3x1P 2.0mm 180D(M) DIP 2000-13 WS Setting Function (1-2) 3.3V (Default) (2-3) 3.8V for 5G module EIS-S232 User Manual...
  • Page 26 COM3 RI Power Setting JSETCOM3 (J1) on AMO-I028 Card Table 2.6: JSETCOM3 (J1) COM3 RI Power Setting JSETCOM3 (J1) COM3 RI Power Setting Part Number 1653003201 Footprint HD_3x2P_79_D Description PIN HEADER 3x2P 2.0mm 180D(M) DIP 21N22050 Setting Function (1-2) Normal (default) (3-4) (5-6) +12V EIS-S232 User Manual...

  • Page 27: Connectors

    COM Connector EIS-S232 provides up to 6 D-sub 9-pin connectors, which offers RS-232/422/485 serial communication interface ports. The default setting is RS-232, the mode RS- 422/485 of EIS-S232 COM3/4/5/6 can be supported via the BIOS settings. COM1/2 supports RS-232. COM3~COM6 ...
  • Page 28 2.3.1.2 Ethernet Connector (LAN) EIS-S232 is equipped with up to 2 x Ethernet controllers that are fully compliant with IEEE 802.3u 10/100/1000 Mbps CSMA/CD standards. These Ethernet ports provides a standard RJ-45 jack connector with LED indicators on the front side to show its Active/Link status (Green LED) and Speed status (Green/Orange LED).
  • Page 29 Hot Plug Detect 2.3.1.4 VGA Connector EIS-S232 provides an integrated 15-pin female VGA digital video interface, which supports up to 1920 x 1200 @ 60 Hz. Please refer to Table 2.6 for its pin assign- ments. Figure 2.7 VGA Connector Table 2.11: VGA Connector Pin Assignments...
  • Page 30 2.3.1.6 Power On/Off Button EIS-S232 has a Power On/Off button with LED indicators on the front side that show “On” (Green LED) and “Off/Suspend” statuses (Orange LED). The Power button sup- ports dual functions: Soft Power -On/Off (Instant off or Delay 4 Seconds then off), and Suspend.
  • Page 31 2.3.1.9 USB3.2 Gen2 and Gen1 EIS-S232 supports 4 x USB 3.2 (Gen2,10G),2 x USB 3.2 (Gen1, 5G), and 2 x Inde- pendent USB 3.2 (Gen1, 5G) interfaces The USB interfaces complies with USB UHCI, Rev. 3.0 standards. Please refer to Table 2.5 for its pin assignments. USB 3.2 Gen1/2 connectors contain legacy pins to interface with USB 2.0 devices, and a new...

  • Page 32: Installation

    Installation 2.4.1 CPU/Memory Installation EIS-S232 User Manual...
  • Page 33 Unscrew the 4 screws on the top cover, and remove the top cover. Install the CPU (LGA1151) and memory into the system. Replace the top cover. EIS-S232 User Manual...

  • Page 34: External Hdd/Ssd Installation

    External HDD/SSD Installation Unscrew 2 x screws on hard drive bay. Install HDD/SSD with 4 x screws on the HDD/SSD tray. Push back the hard drive bay into the system and use the same screws to affix. EIS-S232 User Manual...

  • Page 35: Mounting Kit Installation

    Retirez le kit de montage et les 4 vis (M4x6L) de la boîte d'accessoires. Screw one of the 2 screws (M4x6L) on left and right side and fix the system hor- izontally. Vissez chaque 2 vis (M4x6L) sur les côtés gauche et droit et fixez le système horizontalement. EIS-S232 User Manual...

  • Page 36: Attaching The Thermal Pad

    Paste the 30 x 30 x 0.2 mm (1.18 x 1.18 x 007 in) thermal pad to the CPU (as illustrated above). Paste the 46 x 46 x 1 mm (1.8 x 1.8 x 03 in) piece to the Copper block (as illus- trated below). EIS-S232 User Manual...

  • Page 37: Bios Settings

    Chapter BIOS Settings...

  • Page 38: Introduction

    AMIBIOS has been integrated into motherboards for over two decades. With the AMIBIOS Setup program, users can modify BIOS settings and control various sys- tem features. This chapter describes the basic navigation of the EIS-S232 BIOS setup screens. AMI's BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.

  • Page 39: Entering The Setup

    BIOS supports your CPU. If there is no number assigned to the patch code, please contact an Advantech application engineer to obtain an up-to-date patch code file. This will ensure that your CPU‘s system status is valid.

  • Page 40: Advanced Bios Features Setup

    3.2.2 Advanced BIOS Features Setup Select the Advanced tab from the EIS-S232 setup screen to enter the Advanced BIOS Setup screen. Users can select any item in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. Users can display an Advanced BIOS Setup option by highlighting it using the <Arrow>...
  • Page 41 CNVi Mode  This option configures connectivity. Discrete Bluetooth Module  SerialIo UART0 needs to be enabled to select BT module. Advanced settings  Configure ACPI objects for wireless devices. EIS-S232 User Manual...
  • Page 42 WWAN Configuration WWAN Device  Enable or Disable M.2 WWAN Device. 3.2.2.2 CPU Configuration EIS-S232 User Manual...
  • Page 43 Number of cores to enable in each processor package. Hyper-Threading  Enable or Disable Hyper-Threading technology. BIST  Enable/Disable BIST (Built-In Self Test) on reset AP threads Idle Manner  AP threads Idle manner for waiting signal to run. MachineCheck  Enable/disable Machine Check. EIS-S232 User Manual...
  • Page 44 FCLK frequency can take values of 400MHz, 800MHz and 1GHz.(1GHz not supported for ULT/ULX SKUs) Voltage Optimization  Auto: This option will honor the silicon default values. ENABLE - Mobile SKU's. DISABLE - Rest of all SKUs other than mobile. EIS-S232 User Manual...
  • Page 45 Enable/disable usage of SMM_DELAYED MSR for MP sync in SMI. SMM Use Block Indication  Enable/disable usage of SMM_BLOCKED MSR for MP sync in SMI. DGR+NR11/NR10 Support  Select DGR with Nifty Rock11 or Nifty Rock10 feature. EIS-S232 User Manual...
  • Page 46 3.2.2.3 Power & Performance – CPU Power Management Control EIS-S232 User Manual...
  • Page 47  Enable/disable platform power limit 2 programming. Platform PL2 Power  Platform power limit 2 power in milliwatts. Power Limit 4 Override  Enable/disable power limit 4 override. Power Limit 4  Power limit 4 in milliwatts. EIS-S232 User Manual...
  • Page 48 Power Limit 4 Lock  Power Limit 4 MSR 601h Lock. When enabled PL4 configurations are locked during OS. When disabled PL4 configuration can be changed during OS. C states  Enable/disable CPU Power Management. EIS-S232 User Manual...
  • Page 49 Min = Max Non-Turbo Ratio. Max = fused turbo ratio, or 255 if CPU is unlocked for overclocking. Energy Efficient Turbo  Enable/disable Energy Efficient Turbo feature. This feature will opportunistically lower the turbo frequency to increase efficiency. EIS-S232 User Manual...
  • Page 50 Number of P states  Sets the number of custom P-states. At least 2 states must be present. EIS-S232 User Manual...
  • Page 51 EIS-S232 User Manual...
  • Page 52 Specify the duty cycle in percentage that the CPU is required to maintain over the configured time window. Range is 0-100. Power Limit 3 Lock  Power Limit 3 MSR 615h Lock. When enabled PL3 configurations are locked during OS. When disabled PL3 configuration can be changed during OS. EIS-S232 User Manual...
  • Page 53 CFG Lock  Configure MSR 0xE2[15], CFG Lock bit. Overclocking Lock  Enable/Disable Overclocking Lock (BIT 20) in FLEX_RATIO(194) MSR. EIS-S232 User Manual...
  • Page 54 RC6 (Render Standby)  Check to enable render standby support. Maximum GT frequency  Maximum GT frequency limited by the user. Disable Turbo GT frequency  Enabled: Disables Turbo GT frequency. Disabled: GT frequency is not limited. EIS-S232 User Manual...
  • Page 55 3.2.2.4 PCH-FW Configuration EIS-S232 User Manual...
  • Page 56  When disabled AMT BIOS features are no longer supported and user is no lon- ger able to access MEBx setup. ME Unconfig on RTC Clear  When disabled ME will not be unconfigured on RTC Clear. EIS-S232 User Manual...
  • Page 57 Me FW Image Re-Flash  Enable/Disable Me FW Image Re-Flash function. FW Update  Enable/Disable ME FW Update function. EIS-S232 User Manual...
  • Page 58 EIS-S232 User Manual...
  • Page 59 Hide Unconfigure ME confirmation prompt when attempting ME unconfigura- tion. MEBx OEM Debug Menu Enable: OEMFlag Bit 14  Enable OEM debug menu in MEBx. Unconfigure ME: OEMFlag Bit 15  Unconfigure ME with resetting MEBx password to default. EIS-S232 User Manual...
  • Page 60 3.2.2.5 Trusted Computing EIS-S232 User Manual...
  • Page 61 TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will restrict support to TPM 2.0 devices, Auto will support both with the default set to TPM 2.0 devices if not found, TPM 1.2 devices will be enumerated. EIS-S232 User Manual...
  • Page 62 3.2.2.6 ACPI Settings EIS-S232 User Manual...
  • Page 63 Enable or disable system ability to hibernate (OS/S4 sleep state). ACPI Sleep State  Select the highest ACPI sleep state the system will enter when the SUSPEND button is pressed. S3 Video Repost  Enable or disable S3 Video Repost. EIS-S232 User Manual...
  • Page 64 3.2.2.7 Embedded Controller Configuration EIS-S232 User Manual...
  • Page 65 Power Saving Mode  Select Power Saving Mode. Deep Sleep delay time  Set delay time for Deep Sleep mode. Watch Dog Timer  Enabled or disabled Watch Dog Timer function. (Starts before OS boots and stops by itself). EIS-S232 User Manual...
  • Page 66 Digital I/O Pin 1~16  Configure Digital I/O Pin. EIS-S232 User Manual...
  • Page 67 3.2.2.8 NCT61260 Super I/O Configuration EIS-S232 User Manual...
  • Page 68 Serial Port  Enable or disable Serial Port. Change Settings  Select an optimal settings for super IO device. COM3~6 Mode  COM mode select. EIS-S232 User Manual...
  • Page 69 3.2.2.9 NCT7802Y HW Monitor EIS-S232 User Manual...
  • Page 70 EIS-S232 User Manual...
  • Page 71 Input the system smart fan IV DC/PWM 3 Value. FAN Temperature 4  Input the system smart fan IV Temperature 4. FAN DC/PWM 4  Input the system smart fan IV DC/PWM 4 Value. FAN Critical Temperature  Input the system smart IV Critical Temperature. EIS-S232 User Manual...
  • Page 72 3.2.2.10 S5 RTC Wake Settings Wake system from Sleep  Enable or disable system wake on alarm event. EIS-S232 User Manual...
  • Page 73 3.2.2.11 AmiSetupNvlock RunTimeVariable Protection Support  Enable/disable the RunTimeVariable Protection Support. EIS-S232 User Manual...
  • Page 74 3.2.2.12 Serial Port Console Redirection Console Redirection  Console Redirection enable or disable. EIS-S232 User Manual...
  • Page 75 3.2.2.13 Intel TXT Information EIS-S232 User Manual...
  • Page 76 3.2.2.14 USB Configuration EIS-S232 User Manual...
  • Page 77 The time-out value for control, bulk, and interrupt transfers. Device reset time-out  USB mass storage device start unit command time-out. Device power-up delay  Maximum time the device will take before it properly reports itself to the host controller. EIS-S232 User Manual...
  • Page 78 3.2.2.15 Network Stack Configuration EIS-S232 User Manual...
  • Page 79 Enable/disable IPv6 HTTP boot support. PXE boot wait time  Wait time in seconds to press ESC key to abort the PXE boot. Media detect count  Number of times the presence of media will be checked. EIS-S232 User Manual...
  • Page 80 3.2.2.16 CSM Configuration CSM Support  Enable/disable CSM Support. EIS-S232 User Manual...
  • Page 81 3.2.2.17 NVMe Configuration EIS-S232 User Manual...

  • Page 82: Chipset Configuration

    3.2.3 Chipset Configuration Select the Chipset tab from the EIS-S232 setup screen to enter the Chipset BIOS Setup screen. You can display a Chipset BIOS Setup option by highlighting it using the <Arrow> keys. All Plug and Play BIOS Setup options are described in this sec- tion.
  • Page 83 Memory Configuration Options VT-d  VT-d capability. Above 4GB MMIO BIOS assignment  Enable/disable above 4GB MemoryMappedIO BIOS assignment. This is enabled automatically when aperture size is set to 2048MB. EIS-S232 User Manual...
  • Page 84 Maximum Memory Frequency selections in Mhz. Max TOLUD  Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automat- ically based on largest MMIO length of installed graphic controller. Fast Boot  Enable/disable fast path through the MRC. EIS-S232 User Manual...
  • Page 85 Graphics Configuration EIS-S232 User Manual...
  • Page 86 Select DVMT 5.0 Pre-Allocated (fixed) graphics memory size used by the inter- nal graphics device. DVMT Total Gfx Mem  Select DVMT5.0 total graphic memory size used by the internal graphics device. PM Support  Enable/disable PM support. PAVP  Enable/disable PAVP. PEG Port Configuration  EIS-S232 User Manual...
  • Page 87 EIS-S232 User Manual...
  • Page 88  Set the physical slot number attached to this port. Program PCIe ASPM after OpROM  Enabled: PCIe ASPM will be programmed after OpROM. PCIe Spread Spectrum Clocking  Allows disabling Spread Spectrum Clocking for compliance testing. EIS-S232 User Manual...
  • Page 89 Detect Non-Compliance Device  Detect Non-Compliance PCI Express device in PEG. EIS-S232 User Manual...
  • Page 90 3.2.3.2 PCH-IO Configuration LAN1 Controller  Enable/disable onboard NIC. Wake on LAN Enable  Enable/disable integrated LAN to wake the system. EIS-S232 User Manual...
  • Page 91 PCIe-USB Glitch W/A  PCIe-USB Glitch W/A for bad USB device(s) connected behind PCIE/PEG port. PCIe function swap  When disabled, prevents PCIE rootport function swap. If any function other than 0th is enabled, 0th will become visible. EIS-S232 User Manual...
  • Page 92 PCH-PCI Express Root  Port control the PCI Express Root Port. ASPM-  Sets the ASPM Level. L1 Substates  PCI Express L1 Substates settings. EIS-S232 User Manual...
  • Page 93 PCIe Speed-  Configure PCIe Speed. Detect Timeout  The number of milliseconds reference code will wait for link to exit detection state for enabled ports before assuming there is no device and potentially dis- abling the port. EIS-S232 User Manual...
  • Page 94 Detect Non-Compliance Device  Detects Non-Compliance PCI Express device. If enabled, it will take more time at POST time. SATA and RST Configuration EIS-S232 User Manual...
  • Page 95 Otherwise all drives will not spin up at boot. SATA Device Type  Identifies if the SATA port is connected to a Solid State Drive or Hard Disk Drive. DITO Configuration-  Enable/disable DITO configuration. EIS-S232 User Manual...
  • Page 96 HDD Unlock  If enabled, indicates that the HDD password unlock in the OS is enabled. LED Locate  If enabled, indicates that the LED/SGPIO hardware is attached and ping to locate feature is enabled on the OS. EIS-S232 User Manual...
  • Page 97 USB Configuration XHCI Compliance Mode  Option to enable Compliance Mode. Default is to disable Compliance Mode. xDCI Support  Enable/disable xDCI (USB OTG device). EIS-S232 User Manual...
  • Page 98 USB Port Disable Override  Selectively enable/disable the corresponding USB port from reporting a Device Connection to the controller. USB Port Power  Enable/disable USB ports power in S4/S5. Security Configuration EIS-S232 User Manual...
  • Page 99 Enable/disable the PCH BIOS Lock enable feature. Required to be enabled to ensure SMM protection of flash. Force unlock on all GPIO pads  If enabled BIOS will force all GPIO pads to be in unlocked state. EIS-S232 User Manual...
  • Page 100 HD Audio Configuration HD Audio  Controls detection of the HD-Audio device. EIS-S232 User Manual...

  • Page 101: Security

    3.2.4 Security Administrator Password  Set Administrator Password. User Password  Set User Password. EIS-S232 User Manual...
  • Page 102 Secure Boot feature is active if secure boot is enabled, Platform Key (PK) is enrolled and the system is in user mode. The mode change requires platform reset. Secure Boot Mode  Secure Boot mode options: standard or custom. EIS-S232 User Manual...

  • Page 103: Boot

    Quiet Boot  Enables or disables Quiet Boot option. Fast Boot  Enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options. EIS-S232 User Manual...

  • Page 104: Save & Exit

    Restore Defaults  Restore/load default values for all the setup options. Save as User Defaults  Save the changes done so far as user defaults. Restore User Defaults  Restore the user defaults to all the setup options. EIS-S232 User Manual...

  • Page 105: Appendix A Watchdog Timer Sample Code

    Appendix Watchdog Timer Sample Code...

  • Page 106: Ec Watchdog Timer Sample Code

    57h ; Watch dog event flag. out dx,al mov dx, EC_Data_Port mov al, 04h ; Reset event. out dx,al mov dx, EC_Command_Port mov al,28h ; start WDT function. (Stop: 0x29, Reset: 0x2A) out dx,al .exit END EIS-S232 User Manual...

  • Page 107: Appendix B Fixing The Lan Order

    Appendix Fixing the LAN Order...

  • Page 108: Problem Statement

    You have to disable LAN2 which is I210 LAN chip in the first BIOS screen. Then install the Win 10 OS. After installing the LAN driver, the order will match the sign on the cabinet. Disable the LAN2 controller in BIOS.(BIOS→Chipset→PCH-IO configuration 2 con- troller = Disabled). EIS-S232 User Manual...
  • Page 109 After installing the LAN driver, I219 will be recognized. Enable LAN2 controller in BIOS. Finally, enter the OS to make sure the LAN order matches the sign on the cabinet. I219 will become the first LAN order. EIS-S232 User Manual...
  • Page 110 No part of this publication may be reproduced in any form or by any means, such as electronically, by photocopying, recording, or otherwise, without prior written permission from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2024...

Table of Contents