Advantech ECU-P1528PE Startup Manual

ECU-P1528PE
8-Port SFP Gigabit Ethernet Card
ECU-P1528RE
8-Port RJ45 Gigabit Ethernet Card
Startup Manual
Packing List
Before installation, please make sure that you have re-
ceived the following:
• ECU-P1528PE Card
• Quick Start User Manual
• ECU-P1528RE Card
• Quick Start User Manual
If anything is missing or damaged, contact your distributor
or sales representative immediately.
Declaration of Conformity
FCC Class A
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference
to radio communications. Operation of this equipment in
a residential area is likely to cause interference in which
case the user is required to correct interference at his own
expense.
CE
This product has passed the CE test for environmental
specifications when shielded cables are used for external
wiring. We recommend the use of shielded cables. This kind
of cable is available from Advantech. Please contact your
local supplier for ordering information.
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com/eAutomation
For technical support and service:
http://www.advantech.com/support/
This startup manual is for ECU-P1528PE and ECU-
P1528RE.
Part No. 2041152800
Printed in China
The ECU-P1528PE is a PCIe (non-universal) extension
card with 8-Port SFP Gigabit Ethernet.
The ECU-P1528RE is a PCIe (non-universal) extension
card with 8-Port RJ45 Gigabit Ethernet.
The ECU-P1528 support following specifications:
• ECU-P1528PE: 8 port SFP Gigabit Ethernet Card
• ECU-P1528RE: 8 port RJ45 Gigabit Ethernet Card
• BUS Type: PCIe of the ECU-P (non-universal)
• Dimensions: 157 x 152 mm (6.2 x 6.0")
• Power Consumption: 5V ±5% @1000mA typical;
• Operating Temp for single card: -25 ~ 60°C (-13 ~140°F)
• Operating Humidity: 5 ~ 95% RH non-condensing
After the device driver is installed, you can now install the
ECU-P1528 card in your computer.
Please follow the steps below to install the ECU-P1528
card:
1. Turn off your computer and unplug the power cord and
2. Remove the slot cover on the back panel of your
3. Touch the metal part on the surface of your computer
4. Insert the ECU-P1528 card into a PCI Express slot.
5. Fasten the two screws on panel of the card.
6. Connect SFP modules to the SFP ports for ECU-
7. Plug in the power cord and turn on the computer.
1st Edition
February 2023
Overview
Specifications
3.3V ±5% @600mA typical;
Operating Temp for dual cards: -25 ~ 55°C (-13 ~131°F)
Hardware Installation
cables. TURN OFF your computer before installing or
removing any components on the computer.
computer.
to neutralize the static electricity that might be on your
body.
Hold the card only by its edges and carefully align it
with the slot. Insert the card firmly into place. Use of
excessive force must be avoided; otherwise, the card
might be damaged.
P1528PE.
ECU-P1528 Startup Manual 1