Setting Lamp Switch Parts - Panasonic GT Series Operation Manual

Creating Screens

3.4.2 Setting Lamp Switch Parts

This section explains how to set, as attributes, the operations of the switches when they are
selected.
1. Double-click lamp switch part SW0.
A dialog box for setting the attributes is displayed.
2. Select the [Switch Operation] tab.
3. In the [Operation Mode] list, select [Back to Previous Screen].
[Back to Previous Screen] is displayed under [Operation List].
4. Press [Add].
5. In the [Operation Mode] list, select [Change Language No.].
[Change Language No. (0)] is displayed under [Operation List].
6. Configure the same settings for SW1 and SW2.
In the [Language No. (0 - 15)] text box for SW1 and SW2, enter 1 and 2,
respectively.

You can use the [Add], [Divert], [Delete], [Up], and [Down] buttons to edit
the operation mode.
3-22