Toolbar - Panasonic GT Series Operation Manual

GTWIN Operations

2.1.3 Toolbar

 Standard toolbar
Number Name
①
[Undo] icon
②
[Redo] icon

The [Undo] icon only applies to drawing and editing operations such as
those applied to character strings, graphics, and parts and to some editor
operations that can be performed from the menu bar. You cannot undo
other operations.
 Display toolbar
Number Name
①
[Enlargement/Reduction Rate] list
②
[Enlarge] icon
③
[Reduce] icon
④
[Display/Hide Grid] icon
⑤
[Display/Hide Guideline] icon
⑥
[Set Grid/Guideline] icon
⑦
[Display/Hide Part Numbers] icon
⑧
[Display/Hide Part Attributes] icon
⑨
[Display/Hide Keyboard Parts] icon
⑩
[Change On/Off of parts] icons
⑪
[Parts Status] list box
⑫
[Select Language Number] list box
⑬
[Previous Screen] icon
⑭
[Next Screen] icon
2-4
Function
Undo the previous operation.
Redo the operation that you undid with the [Undo] icon.
Function
Display the screen at the specified magnification.
Enlarge the display of the screen.
Reduce the display of the screen.
Switch between displaying and hiding the grid.
Switch between displaying and hiding the guideline.
Open the grid/guideline setting screen.
Switch between displaying and hiding part numbers.
Switch between displaying and hiding part attributes.
Switch between displaying and hiding keyboard parts.
Switch the status of the selected part between ON and OFF.
Switch the status of the selected lamp switch part between
ON and OFF and the number of message parts.
Switch the language number of the selected base screen.
Open the screen whose number is immediately before the
number of the screen being edited. If this screen is already
open, it will be set as the active screen.
Open the screen whose number is immediately after the
number of the screen being edited. If this screen is already
open, it will be set as the active screen.