GTWIN Operations
2.5 GTWIN Ver. 3 Usage Procedures
2.5.1 Section Overview
This section explains the GTWIN basic operation procedures by separating them into the
following four steps.
Operation procedures
Explanation
Starting GTWIN
①
→ Displaying the file
manager
②
Creating a base screen
→ Saving data
③
Transferring data to the
GT
④
Exiting GTWIN
2-14
Main operations
Start GTWIN and create a new file. Select the GT and PLC models.
Set the communication area with the PLC.
When the sequence of operations is complete, the file manager will be
displayed.
Double-click a screen number in the file manager to open its base screen.
Drag a part to place it on the base screen.
Press [Save As] to save the data.
From GTWIN, select the data transfer screen.
You can select the transfer method from transferring all the data, the
selected data, or the data that has been changed.
Exit GTWIN.