Drawing And Setting Lamp Switch Parts (1) Lamp Parts - Panasonic GT Series Operation Manual

Creating Screens

3.2.2 Drawing and Setting Lamp Switch Parts (1) Lamp Parts

Draw the parts that function as lamps.
 Drawing
1. Use the library switching list in the parts library to select [Lamp].
2. Drag a lamp switch part from the parts library to the base screen.
3. Select ML0, the lamp switch part that you have placed on the screen.
4. Drag one of the ■ marks displayed in the corners of the part to change its
size.
 Completed area (lamp parts are placed)
The section surrounded by the yellow line indicates the completed area through this
procedure.
3-6