Creating Screens
3.2.5 Drawing and Setting Clock Parts
Draw the parts that display the clock.
Drawing
1. Use the library group switching list in the parts library to select [Clock].
2. Drag a clock part from the parts library to the base screen.
One clock part is required for each of the year, month, day, hour, minute, second,
and day of week. Repeat these steps as many times as the required number of
clock parts.
3. Select
4. On the [Edit] menu, point to [Align], and then select the required alignment
position on the menu that is displayed.
Completed area (clock parts are placed)
The section surrounded by the yellow line indicates the completed area through this
procedure.
3-12
on the drawing toolbar, and then select all the placed clock parts.