Creating Screens
4. Select the keyboard parts from the parts library, and then place these parts.
The keyboard parts are in the [Standard] library of the parts library.
Completed area (keyboard parts are placed)
The section surrounded by the yellow line indicates the completed area through this
procedure.
3.3.2 Setting Keyboard Parts
This section explains how to set the keyboard part attributes.
1. Double-click keyboard part KY0.
A dialog box for setting its attributes is displayed.
2. Change the number of keys and the size of the keyboard as necessary.
In GTWIN Ver. 3, you can edit the characters of the keys displayed on the
[Basic Setup] tab in the [Keyboard Parts] dialog box by dragging these
characters.
3-20