3.4 Creating the Language Switching Screen (Base
Screen: B-2)
3.4.1 Creating the Base Screen
This section explains the procedure for placing switch parts on the base screen (B-2).
1. Select [B] under [Screen type] in the file manager, and then double-click the
button for screen number 2.
Base screen 2 is created.
2. Draw a character string.
3. Select a switch part from the parts library, and then place three parts in total.
In this example, select [FS_R_RB1_W] from the design library for each part.
Completed area (switch parts are placed)
The section surrounded by the yellow line indicates the completed area through this procedure.
3.4 Creating the Language Switching Screen (Base Screen: B-2)
3-21