Delayed Start; Additional Options; Activating/Deactivating Automatic Appliance Door Opening; Selecting The Spraying Arm(S - Hanseatic HGVI6082A147913DS User Manual

Fully integrable dishwasher
Table of Contents

Advertisement

Available languages

Available languages

Delayed start

The washing cycle will normally begin as
soon as the appliance door has been closed.
If you want the cycle to begin later, you can
specify this. The start time can be delayed
between 1 and 24 hours.
Press the
button (3) as many times as
necessary for the display (5) to show the
delay required (
,
H : 0 0

Additional options

You can combine the various dishwashing
programmes with additional options. The ad-
ditional options must be selected before start-
ing the dishwashing programme.
– "Intensive cleaning"
This option allows you to further improve
the cleaning results.
– "Extra dry"
(11):
This option produces an improved drying
result.
"Quick cleaning active"
This option shortens the programme cy-
cle. It is recommended for crockery with
minimal staining.
To switch the option
– on, press the
ly until the indicator under the corre-
sponding symbol is flashing on the
display (5).
– off, press the
dicator will go out.
These options are not available with the pro-
gramm
.
The options "Intensive cleaning"
"Extra dry"
(11) are not available with the
programm
.
to
).
H : 0 1
H : 2 4
(10):
(15):
button (7) repeated-
button again. The in-
(10) and
Dishwasher operation
Activating/deactivating
automatic appliance door
opening
To activate "automatic appliance door
opening", press the
(8) button at the same time and hold
them for approx. 3 seconds.
The
indicator (14) will light up. The ap-
pliance door opens as soon as the pro-
gramme has reached the drying phase.
To deactivate "automatic appliance door
opening", press the
button at the same time and hold them for
approx. 3 seconds.
The
indicator will go out. The appli-
ance door remains locked when the pro-
gramme has reached the drying phase.

Selecting the spraying arm(s)

If only one of the two dish racks is loaded, you
should deactivate the spraying arm which you
do not require.
– Upper dish rack loaded:
– Lower dish rack loaded:
Press the
button (8) repeatedly until
only the symbol for the spraying arm you
require lights up.
Page EN-29
button (7) and the
button and the

Advertisement

Chapters

Table of Contents
loading

Table of Contents