Automatic Door Opening; Unloading The Dishwasher - Hanseatic HGVI6082A147913DS User Manual

Automatic door opening

The appliance door opens automatically at
the end of the programme to improve the dry-
ing process. Do not block the appliance door
when using a programme with the automatic
appliance door-opening function. The locking
mechanism may be damaged if you do so.

Unloading the dishwasher

CAUTION
Risk of scalding!
Hot steam will emerge when you open
the appliance door.
■ Maintain a sufficient distance from
the appliance door and do not hold
your head or upper body directly
above the open appliance door.
■ Make sure that children do not open
the appliance door if the programme
has only finished a short time ago.
■ Only open the appliance door slight-
ly to allow the steam to escape more
easily.
■ Allow the dishes to cool before un-
loading the dishwasher.
Risk of injury!
People may trip over the open appli-
ance door.
■ Note that the appliance door should
not be left in the open position since
this could present a tripping hazard.
■ Close the appliance door after every
use.
Dishwasher operation
NOTICE
Risk of damage to property!
Improper handling of the appliance
may damage it.
■ Make sure that children and pets
do not stand on the open appliance
door.
Once the programme has come to an end
and the dishes have cooled, you can remove
them.
1. When unloading the dishwasher, start
with the lower rack and then unload the
upper rack. This will prevent water drip-
ping onto the lower layer of dishes from
the top layer of dishes.
2. Leave the appliance door open slightly so
that the inside of the appliance can cool
off and dry.
If no further settings are made, the appliance
will automatically switch off after 15 minutes.
Page EN-31