Table of Contents
Advertisement
Component Identification and Explanation
1
2
3
Number
Component Identification
1
Protective Cover
Negative Terminal (-)
2
(DINSE 35/50 Type, 1/2" nominal dia.)
Shielding Gas Connector
3
(Quick Connect, 9mm tube Type 21 )
Positive Terminal (+)
4
(DINSE 35/50 Type, 1/2" nominal dia.)
7 Pin Control Connector (5/8" Type GX16-7)
5
6
Front Panel View
Keep down and in place during welding activities and in storage.
Connect the TIG torch to this terminal for all TIG welding applications
including AC. Connect the work clamp to this terminal for most Stick
welding applications
Connect the work clamp to this terminal for all TIG welding applications
including AC. Connect the Stick Electrode Holder (Stinger) to this termi-
Handles
Component Note
Single Shut-off Type for Inert Gas.
Ref. EV-9MM-B-QUICKCONNECT-STDSET or 21KATS09MPX
nal for most Stick welding applications.
Ref. EV-PANA7-625-PLUG
Assy. Required, removeable for Low Clearance applications
22
6
5
4
Advertisement
Table of Contents
