Care Of The Exterior; Care Of The Spa Cover - HotSpring HIGHLIFE GRANDEE Owner's Manual

To remove and replace the spa pillows:
1. Carefully pull and lift on one end of pillow to stretch pillow (longer)
until the pillow is released from the plastic retainer. Once one end
is released, push pillow in opposite direction to remove from other
retainer.
2. Align pillow by locating the arrow on back side of pillow and facing the
arrow upwards.
3. Slide one end of pillow onto the spa retainer.
4. Pull other end of pillow; using both hands lift pillow above retainer and
with a stretching motion slide pillow recess onto retainer.

CARE OF THE EXTERIOR

SPA SHELL
Your HOT SPRING spa has an acrylic shell. Stains and dirt generally
will not adhere to your spa's surface. A soft rag should easily remove
most dirt. Most household chemicals are harmful to your spa's shell
(see below for detailed information on cleaning agents). Always rinse
off any spa shell cleaning agent with fresh water.
IMPORTANT:
1. The following products are the ONLY approved cleaning agents
for your HOT SPRING spa shell: plain water, HOT SPRING
FRESHWATER Spa Shine, or Soft Scrub
any other household cleaner other than those listed to clean the
spa shell surface is NOT recommended. DO NOT use any cleaning
products containing abrasives or solvents since they may damage
the shell surface, specifically: Simple Green
NEVER USE HARSH CHEMICALS! Damage to the shell by use of
harsh chemicals is not covered under the warranty. Always rinse off
any spa shell cleaning agent with fresh water.
2. Iron and copper in the water can stain the spa shell if allowed to go
unchecked. Ask your HOT SPRING dealer about a Stain and Scale
Inhibitor to use if your spa has a high concentration of dissolved
minerals. (Watkins recommends FRESHWATER Stain & Scale
Defense.)
3. Keep all cleaners out of the reach of children and use care when
applying.
SPA CABINET
HOT SPRING spas include a spa cabinet made from a rigid polymer for
durability and adds a finish that provides a rich, attractive appearance.
Cleaning of the cabinet consists of simply spraying the cabinet with a
mild soap and water solution to remove any stains and residue.
Do not rub the cabinet with abrasive materials or use abrasive cleaners
as this may damage its surface.
Spa Care and Maintenance
®
. The use of alcohol or
® ®
, Windex or Spa Mitt.
Page 31

CARE OF THE SPA COVER

WARNING: The cover is a manual safety cover that meets or
exceeds all prevailing requirements of ASTM 1346-91 for spa safety
covers when installed and used correctly as of the date of manufacture.
Non-secured, or improperly secured covers are a hazard.
Open the cover to its fully open position before use.
COVER CARE
The cover is made with a solution dyed polyester fabric and is an
attractive, durable foam insulation product. Monthly cleaning is
recommended to maintain its beauty and a longer fabric life.
To clean and condition the polyester cover:
1. Remove and gently lean against a wall or fence. If a cover lifter has
been installed keep cover closed and make sure all seams are closed
to prevent any soap from entering the spa.
2. With a garden hose, spray the cover to loosen and rinse away dirt or
debris.
3. Add four tablespoons of mild soap or mild dishwashing liquid with one
gallon (4 liters) of lukewarm water. Clean using a soft bristle brush. Rinse
thoroughly with cold water and air dry. IMPORTANT: Do not let the
polyester dry with a soap film on it before it can be rinsed clean.
4. Scrub the cover's perimeter and side flaps. Rinse clean with water.
5. Rinse off the underside of the cover with water only (use no soap), and
wipe it clean with a dry rag.
DO:
• Remove snow buildup to avoid breakage of the foam core from the
additional weight of the snow.
• Lock cover lock straps to secure the cover when the spa is not in use.
DON'T:
• Drag or lift the spa cover using either the flaps, or the cover lock straps.
• Walk, stand, or sit on the cover.
• Place any metal or heat transferring object on the cover or place any
type of plastic tarp or drop cloth over the cover as this may result in a
melted foam core, which would not be covered under the warranty.
• Use any lifting mechanisms, chemicals, or cleaners except those
recommended by WATKINS WELLNESS, or its Authorized Sales and
Service Dealer.