Filter Cartridges Removal And Cleaning; Care Of The Spa Pillows; Care Of The Exterior - HotSpring Vista Owner's Manual

sub-freezing temperatures and goes unnoticed, the spa water may freeze. Any damage to the spa (due to freezing) caused as a result
of poor maintenance (stated under misuse or abuse in the Hot Spring
dANgeR: To reduce the risk of injury to persons using the spa, DO NOT remove the suction fittings (filter standpipes) located in the
filter compartment and do not sit on the filter lid, in extreme cases the lid could crack and break. This occurrence is considered
abuse and is not covered under warranty.
fIlTeR CARTRIdgeS ReMOvAl & CleANINg
1. Disconnect the spa from the power supply by tripping both of the GFCI breakers located in the subpanel.
2. Remove and carefully set aside the filter compartment cover.
3. Remove any floating items from within the filter compartment.
4. Turn the filter retainer handle (located on the top of the filter cartridge) counterclockwise until the retainer can be removed from the filter
standpipe.
5. Remove the filter retainer and cartridge.
SeRvICe NOTe: Never remove the filter standpipes when debris is present in the filter compartment. Debris may find its way into the
internal plumbing which may result in blockage. NEVER REMOVE SUCTION FITTINGS.
6. Always clean standard filter using a filter degreaser, such as Hot Spring FreshWater
buildup. Simply soak the filter in the degreaser according to the package directions, then place the filter on a clean surface and spray
until clean using a garden hose. It may be necessary to rotate the filter while spraying to remove any debris lodged between the filter
®
pleats. The Tri-X filter (standard on Vista
soap and no dry cycle. Please contact your Hot Spring dealer for details.
7. To reinstall the filter cartridge, reverse the order of steps in which it was removed. Do not overtighten!
WARNINg: Do not use the spa with the filter cartridges, or filter standpipe(s) removed!

CARe Of THe SPA PIllOWS

The spa pillows will provide years of comfort if treated with care. They have been positioned above the water level to minimize the
bleaching effects of chlorinated water, and other spa water chemicals. To extend their life, whenever the spa shell is being cleaned, the
spa pillows should be removed and cleaned. Body oils can be removed with a mild soap and water solution. ALWAYS rinse off the spa
pillows thoroughly to remove any soap residue. The pillows can be conditioned with Hot Spring Cover Shield after cleaning. If the spa is
not going to be used for a long period of time (that is during a vacation, or if the spa is winterized), or when the spa water is being super-
chlorinated, the spa pillows should be removed until the next spa use.
To remove and replace the spa pillows:
1. Carefully pull and lift on one end of pillow to stretch pillow (longer) until the pillow is released from the plastic retainer. Once one end is
released, push pillow in opposite direction to remove from other retainer.
2. Align pillow by locating the arrow on back side of pillow and facing the arrow upwards.
3. Slide one end of pillow onto the spa retainer.
Pull other end of pillow; using both hands lift pillow above retainer and with a stretching motion slide pillow recess onto retainer.
4.

CARe Of THe eXTeRIOR

SPA SHell
Your Hot Spring spa has an acrylic shell. Stains and dirt generally will not adhere to your spa's surface. A soft rag or a nylon scrubber
should easily remove most dirt. Most household chemicals are harmful to your spa's shell. Watkins Manufacturing Corporation
recommends HotSpring FreshWater
with fresh water.
SeRvICe NOTeS:
1. Iron and copper in the water can stain the spa shell if allowed to go unchecked. Ask your Hot Spring dealer about a Stain and Scale Inhibitor to
use if your spa water has a high concentration of dissolved minerals. (Watkins recommends FreshWater Stain & Scale Defense.)
2. The use of alcohol or any household cleaners other than those listed to clean the spa shell surface is NOT recommended. DO NOT use any
cleaning products containing abrasives or solvents since they may damage the shell surface. NeveR USe HARSH CHeMICAlS! Damage to
the shell by the use of harsh chemicals is not covered under the warranty.
IMPORTANT: Some surface cleaners contain eye and skin irritants. Keep all cleaners out of the reach of children and use care when applying.
®
eveRWOOd SPA CAbINeT
®
Hot Spring spas include an Everwood spa cabinet. Everwood consists of a rigid polymer that combines the durability of plastic with the
® ®
, Grandee , Envoy
®
Spa Shine for minor surface cleaning. Always thoroughly rinse off any spa shell cleaning agent
Page 46
®
spa Limited Warranty), will not be covered by your spa warranty.
®
Filter Cleaner, to remove mineral and oil
® ®
& Aria models only) can be cleaned in the dishwasher using no
Spa care and maintenance