Care Of The Exterior; Care Of The Spa Cover - HotSpring Grandee GG Owner's Manual

To remove and replace the spa pillows:
1. carefully pull and lift on one end of pillow to stretch pillow (longer)
until the pillow is released from the plastic retainer. once one end
is released, push pillow in opposite direction to remove from other
retainer.
2. Align pillow by locating the arrow on back side of pillow and facing the
arrow upwards.
3. Slide one end of pillow onto the spa retainer.
4. Pull other end of pillow; using both hands lift pillow above retainer and
with a stretching motion slide pillow recess onto retainer.

CARE OF ThE ExTERIOR

SPA SHell
®
your Hot Spring spa has an acrylic shell. Stains and dirt generally
will not adhere to your spa's surface. A soft rag or a nylon scrubber
should easily remove most dirt. Most household chemicals are harmful
to your spa's shell. Watkins Manufacturing corporation recommends
®
Hot Spring FreshWater Spa Shine for minor surface cleaning. Always
thoroughly rinse off any spa shell cleaning agent with fresh water.
ImporTanT:
1. Iron and copper in the water can stain the spa shell if allowed to go
unchecked. Ask your Hot Spring dealer about a Stain and Scale
Inhibitor to use if your spa water has a high concentration of dissolved
minerals. (Watkins recommends FreshWater Stain & Scale defense.)
2. The use of alcohol or any household cleaners other than those listed
to clean the spa shell surface is NoT recommended. do NoT use
any cleaning products containing abrasives or solvents since they
may damage the shell surface. never use HarsH CHemICals!
damage to the shell by the use of harsh chemicals is not covered
under the warranty. Some surface cleaners contain eye and skin
irritants. keep all cleaners out of the reach of children and use care
when applying.
®
eVeRWood SPA cABINeT
®
Hot Spring spas include an everwood spa cabinet. everwood consists
of a rigid polymer that combines the durability of plastic with the beauty
of real wood. everwood won't crack, peel, blister, or delaminate even
after prolonged exposure to the elements.
cleaning of everwood consists of simply spraying the cabinet with a
mild soap and water solution to remove any stains and residue.
do not rub the everwood with an abrasive material or use abrasive
cleaners as this may damage its texture.
Watkins Manufacturing corp. recommends touch-up or restaining of
the everwood every three to four years (this will vary according to the
environment). contact your local dealer for restaining procedures and
recommended stains.
SPASToNe ® cABINeT
To clean your SpaStone cabinet or steps, use a mild household
detergent and soft cloth or sponge, and wipe gently. do not rub
the SpaStone step or cabinet nor use abrasive cleansers, as these
will damage the SpaStone painted surface. Following these simple
guidelines will result in a beautiful look for years to come!
Please note that as with any exterior paint, your Hot Spring SpaStone
product will fade and weather naturally over time. contact your dealer
for touch-up paint and instructions.
Spa Care and Maintenance

CARE OF ThE SPA COVER

WarnInG: The cover is a manual safety cover that meets or
exceeds all prevailing requirements of ASTM 1346-91 for spa safety
covers when installed and used correctly as of the date of manufacture.
Non-secured, or improperly secured covers are a hazard.
open the cover to its fully open position before use.
VINyl coVeR
The vinyl spa cover is an attractive, durable foam insulation product.
Monthly cleaning and conditioning are recommended to maintain its
beauty.
To clean and condition the vinyl cover:
1. Remove the cover from the spa and gently lean it against a wall or
fence.
2. With a garden hose, spray the cover to loosen and rinse away dirt or
debris.
3. using a large sponge and/or a soft bristle brush, and using a very mild
soap solution (one teaspoon dishwashing liquid with two gallons of
water), or baking soda (sodium bicarbonate), scrub the vinyl top in a
circular motion. do not let the vinyl dry with a soap film on it before it can
be rinsed clean.
4. Scrub the cover's perimeter and side flaps. Rinse clean with water.
5. Rinse off the underside of the cover with water only (use no soap), and
wipe it clean with a dry rag.
6. To condition the cover after cleaning, apply a thin film of Hot Spring
cover Shield to the vinyl surface and buff to a high luster.
ImporTanT: To remove tree sap, use cigarette lighter fluid (not charcoal
lighter fluid). use sparingly, and rinse with a saddle soap solution
immediately afterwards, then wipe dry.
do:
• Remove snow buildup to avoid breakage of the foam core from the
additional weight of the snow.
• lock cover lock straps to secure the cover when the spa is not in use.
don'T:
• drag or lift the spa cover using either the flaps, or the cover lock
straps.
• Walk, stand, or sit on the cover.
• Place any metal or heat transferring object on the cover or place any
type of plastic tarp or drop cloth over the cover as this may result in a
melted foam core, which would not be covered under the warranty.
• use any lifting mechanisms, chemicals, or cleaners except those
recommended by Watkins Manufacturing corporation, or its
Authorized Sales and Service dealer.
Page 27
Spa Care and Maintenance