Home Screen Top Bar; Settings Screen - HotSpring HIGHLIFE GRANDEE Owner's Manual

HOME SCREEN TOP BAR

The Home screen is the default screen. On the top you see 4 icons and
a clock.
POWER BUTTON
Press button to turn jets on high and all lights on blue if both are
currently turned off. It will also turn all jets, lights, and music off if those
features are on.
FLIP SCREEN
Press button to flip the screen for easy viewing and operation
when inside the spa. Press a second time to reverse.
SOAK TIMER
Press (clock) to display a large clock on the main screen.
Press to activate the Soak Timer, this is an alarm clock to let you
know you have been in the tub for 15 minutes. If jets are on at the end
of the timer then they will be turned off letting you know your time is up.
If there are no jets on, then jet pump 1 will turn on high speed for 5
seconds then turn off. To set Soak Timer for a 30,45 or 60 minute soak
time, press and hold for several seconds to bring up screen below.
Soak Timer
Duration
Press +/- button until desired time is shown followed by
activate. will appear on the Top Bar when activate.
SCREEN INFORMATION
Press to display words below each icon on that screen describing
the icon.
Operating Instructions
Home Screen
When
Activated
to
Page 15

SETTINGS SCREEN

Press on the Home screen to display the Settings Screen.
In the setting screen you will be able to set the spa clock, see internal
information about your spa, change to °F or °C, change brightness of
the screen, change the language and lock out the spa screen functions.
Settings
BRIGHTNESS SCREEN
Press button in Settings screen to display the Brightness screen.
Brightness
AUTO
OFF
Press the or to manually adjust the brightness of your control
panel screen. If you would like the spa to Automatically adjust the
brightness, press the button.
AUTO
OFF
LANGUAGE SCREEN
Press button in Settings screen to display the language screen.
Language
Press the slider arrow up or down to select your language. Once your
language is highlighted press the
TEMPERATURE °F/°C SETTING
Press button in Settings screen to change setting to
versa.
Settings
button to activate.
or vice