Table of Contents
Advertisement
Please ensure that any plastic coatings are removed prior to use. Before operation, the
appliance should be thoroughly cleaned and dried.
Discolouration of heated parts is caused by factory testing to ensure a satisfactory unit. It
does not affect quality or performance.
8.2 SITING / CLEARANCES
8.2.1 Position the appliance and level using feet or castors adjusters as shown below.
8.2.2 To adjust height of unit with feet twist lower half of feet as necessary.
8.2.3 When on stand to adjust height of unit with feet twist lower half of feet as necessary.
8.2.4 To adjust height of castor, loosen grub screw and twist body of castor as necessary.
Once height set to required position tighten grub screw to secure.
THIS APPLIANCE CAN BE SITED AGAINST A COMBUSTABLE
WALL.
TAKE CARE WHEN MOVING AN APPLIANCE FITTED WITH
CASTORS.
26
Advertisement
Table of Contents
