Subscribe to Our Youtube Channel
Related Manuals for Falcon FFM-1
Summary of Contents for Falcon FFM-1
- Page 1 422 Allied Drive, Nashville, TN 37211 1-800-251-8521 fax 615-832-0048 FFM-1 ROTARY MARINATOR OPERATION MANUAL 115V SARKU JAPAN SPECIFIC MODEL MASTER PART #66-307SAK...
- Page 2 422 Allied Drive, Nashville, TN 37211 1-800-251-8521 fax 615-832-0048 FFM-1 ROTARY MARINATOR OPERATION MANUAL 115V SARKU JAPAN SPECIFIC MODEL, MASTER PART #66-307SAK SARKU CHICKEN MARINATING PROCEDURE OUTLINED SECTION 1. DESCRIPTION SECTION 2. UNPACKING AND SET UP SECTION 3. OPERATION SECTION 4. CLEANING SECTION 5.
- Page 3 FFM-1 ROTARY MARINATOR OPERATION MANUAL 115V SARKU JAPAN SPECIFIC MODEL, MASTER PART #66-307SAK SARKU JAPAN CHICKEN MARINATING STANDARD PROCEDURE: Slice chicken when it’s internal temperature is 25°F to 26°F. The marinator drum will hold a maximum of 110 pounds of meat and marinade.
- Page 4 1. DESCRIPTION The FFM-1 Rotary Marinator is a rotating chicken marinator with a drum capacity of 110 pounds (chicken + marinade). The major components of the FFM-1 are shown in Figure 1 below. The Coupling Adapter (1) transmits torque and absorbs shock between the motor drive shaft and marination drum.
-
Page 5: Assembly And Setup
3. OPERATION 1. Prepare chicken pieces for marination per your established procedures. The FFM-1 Marinator can marinate up to 20+ heads at once. 2. Make sure both drain lugs are in place beneath drum. 3. Place Sarku sliced chicken from walk-in cooler as prepared by Sarku established procedures in the marinator drum. - Page 6 OPERATION (Continued...) 10. Push START button. Drum will stop automatically after preset time. To stop rotation at any time, push STOP. To change preset time, unplug marinator and remove motor enclosure cover, Adjust timer dial to desired time. Replace motor enclosure cover.
-
Page 7: Maintenance
NEVER mix old and new lubricant. SECTION 6 6. TROUBLESHOOTING WARNING Troubleshooting and repair of the FFM-1 Marinator must be done by trained and authorized personnel ONLY! UNAUTHORIZED PERSONNEL MUST NOT ATTEMPT TO REPAIR THIS EQUIPMENT Most procedures will require the unit to be energized with the motor enclosure removed. - Page 8 SECTION 7 FALCON FFM-1 MARINATOR 66-307SAK ITEM # QTY. PART # DESCRIPTION ITEM # QTY. PART # DESCRIPTION 24-01-222 DRUM LID A31-307 " START " NAMEPLATE A31-230 LATCHING BAR "O" RING 10-06-027 CONTACT BLOCK, NORMALLY CLOSED 66-556 HANDLE BEARING WASHER A31-306 "...
-
Page 9: Limited Warranty
LIMITED WARRANTY Unless otherwise specified, Falcon Fabricators, Inc. (Falcon) warrants to the ORIGINAL USING PURCHASER of a new FFM-1 Rotary Marinator that it will be free of defects in materials or workmanship under normal use as follows: For a period of 90 days from date of Falcon's invoice, Falcon will pay the reasonable and customary labor charges of a service technician AUTHORIZED BY FALCON to repair the defective marinator.
Need help?
Do you have a question about the FFM-1 and is the answer not in the manual?
Questions and answers