7.0 INSTALLATION
7.1 Unpacking
1. Remove all packaging from the appliance.
2. Remove all plastic coatings.
3. Ensure there are no missing parts.
4. Ensure that no damage is evident.
7.2 Siting / Clearances
150mm
150mm from any combustible wall.
CAUTION: If suiting, the necessary clearances to any combustible wall MUST
BE the largest figure given for individual appliances instructions.
DO NOT directly connect the flue to any mechanical extraction system or to the outside air.
The flue discharges vertically through hob rear. Care should be taken not to disturb the air
combustion admission and evacuation of the flue.
If a Gully is used in the premises, ensure there is a gap of
200mm between the gully and front of the appliance.
Well lit draught free area.
Level, Fireproof surface.
11