Figure 25. Installing the right fan
Steps
1. Align and place the right fan onto the palm-rest assembly.
2. Replace the two (M1.6x3) screws to secure the right fan to the palm-rest assembly.
3. Connect the right-fan FPC cable to the connector (FANR) on the system board.
4. Adhere the mylar sticker on the system board.
Next steps
1. Install the
base
cover.
2. Install the
Nano-SIM card
3. Follow the procedure in
Removing the left fan
Prerequisites
1. Follow the procedure in
NOTE:
Ensure that your computer is in Service Mode. For more information, see step 6 in
computer.
2. Remove the
Nano-SIM card
3. Remove the
base
cover.
About this task
The following image indicates the location of the left fan and provides a visual representation of the removal procedure.
tray.
after working inside your
Before working inside your
tray.
computer.
computer.
Removing and installing Customer Replaceable Units (CRUs)
Before working inside your
47